road signs not available

Hi Alex,

I'm still testing on the road sign recognition, do you have the settings that you have made?
Below you will find my settings but it still doesn't work.

[A5-Front Sensors]
Click on Extended coding
Press the button on the top right that shows a '0' and '1' to see it Bytes mode; Each Byte has 8 bits (from 0 to 7 included)
Press the right arrow down until you reach Byte 16
Inside Byte 16 activate bit 4 and do not modify the rest
Press the Validate button
Exit Module A5 and enter Module 5F
Click on Adaptation
Search for Car_Function_Adaptations_Gen2
Enter menu_display_road_sign_identification and change to On
Enter menu_display_road_sign_identification_over_threshold_high and change to On
Press the Validate button
Go back to Adaptation and look for Car_Function_List_BAP_Gen2
Enter traffic_sign_recognition_0x21 and change to On
Enter traffic_sign_recognition_0x21_msg_bus and change to ' Data Bus Infotainment'
Press the Validate button
Exit Module 5F and enter Module 17
Click on Extended Coding
Press the button on the top right that shows a '0' and '1' to see it Bytes mode; Each Byte has 8 bits (from 0 to 7 included)
Down, press the right arrow until you reach Byte 5
Inside Byte 5 activate bit 2 and do not modify the rest
Press the Validate button
Restart the Infotainment by pressing and holding the power button between 10s to 15s and release.
It should work already. In the settings of the driving assistants, the option 'Signal recognition' should appear and the speed signals appear in the frame.
Note: This extra is associated with the GPS, so those without a GPS will see a message on the infotainment when entering to see ' the state of the car' which indicates that signal recognition is limited. This warning will also appear for a few seconds in the instrument cluster to start the march. This message is only informative and does not produce any problem, error or failure. The recognition of signals will work normally but limited without the information that the navigator could provide.

Hi, I've got a 2019 t cross r line advanced with navigator. Can I use obd to show road signs on the digital cockpit? How does the car read the signs?

Hi
It not working I have t cross style r line and it not working I make coding I can see on seting road sings settings but not show noting my car not have navigation just android auto but have a5 camera and active info display

A5 Front sensors for driver assistance systems

System description: MQB_B_MFK
Software number: 3Q0980654R
Software version: 0460
Hardware number: 3Q0980654A
Hardware version: H12
Serial number: 23012015K25955
ODX name: EV_MFKBoschMQBB
ODX version: 002041
Long coding: 0002070600000401002213548156440084000E20002000

Error codes:
No error codes found

DOES NOT WORK!

Ako dám nový software do kamery?

could you please do a guide on how to? And how to get firmwares / tools?