yoda
New Member
Posts: 12
|
Post by yoda on Sept 11, 2019 20:09:04 GMT
having issues coding a rear view camera on a mk7.5 gtd.
looking through the forum some talk about 5f and but 19. But I cannot find this.
i found the rear camera option in the parking section but even though the camera flips nothing except for the normal sensor displays.
any help appreciated
scott
|
|
|
Post by dv52 (Australia) on Sept 12, 2019 8:36:42 GMT
Go to the Information Control Unit 1 @ address hex5F - select Coding and set the highlighted entry below: If you don't get this screen after selecting Coding - press the 0/1 symbol on the left-side of the "?" in the circle (upper right-side of my picture) Don
|
|
|
Post by Carolco on Sept 12, 2019 14:54:34 GMT
Byte 19. - bit 4 activated in 5F module
|
|
yoda
New Member
Posts: 12
|
Post by yoda on Sept 12, 2019 15:25:47 GMT
Got it. It was under module 56 Radio. I had to enter the security code. Then into long coding and there it was. Byte_19_rear_view_low. Set this to activated
|
|
|
Post by golf7bazi on Sept 14, 2019 8:28:58 GMT
Module 56 in a Golf 7.5? Thought that where only in older VW's
|
|