|
Post by notarobot on Sept 1, 2019 23:24:27 GMT
Hi, I'm trying to enable the Aux in on my 2012 (8R) Q5 but am not having any joy. I set Bit 0 and Bit 2 to true of byte 00 in the radio sub menu but still don't have the input show up after coding it. Do I need to disable/enable anything else to make this work? I've been Googling to try and work this out but not found anything useful - help!
|
|
|
Post by eken65 on Apr 15, 2022 11:36:51 GMT
I have the same problem,,
|
|
|
Post by sabad66 on Jun 20, 2023 1:17:40 GMT
If you have concert/symphony, try this:
Radio->long coding
Set aux installed Then go to bit mode (top right), then set byte index 11, uncheck bit 3
|
|