|
Post by snowj720 on Aug 31, 2019 20:17:15 GMT
I know it's possible, just not sure of coding. Also, is it possible to have them alternate with the indicator on the same side?
|
|
|
Post by dv52 (Australia) on Aug 31, 2019 21:43:50 GMT
^^^^^ need more information
|
|
|
Post by snowj720 on Sept 3, 2019 19:08:49 GMT
It's a NA model Alltrack (2017) with halo lights. It seems like I saw some that had the yellow/orange(?) Front park lights that also functioned as turn indicators in addition to the actual front signals.
|
|
|
Post by dv52 (Australia) on Sept 3, 2019 23:31:33 GMT
^^^ OK - for obvious reasons (primarily because I happen to live in the very deep south - of the world, not USA), i'm guessing which Leuchte-sets on your NAR model are pertinent. I suspect that it all happens in Leuchte2SL VLB10 (left-side) and Leuchte3SL VRB21(right-side).
You can confirm my suspicion by changing the value of Dimmwert AB channel in one of these Leuchte-sets to 0 (from 100) and the lamp on one side should not light-up. Then restore the setting back to 100.
If this is confirmed, do the following: Leuchte2SL VLB10-Lichtfunktion A 2 >Blinken links Hellphase Leuchte3SL VRB21-Lichtfunktion A 3 >Blinken rechts Hellphase
Don
|
|
|
Post by snowj720 on Sept 5, 2019 22:55:36 GMT
Thank you Don. Worked like a charm. The only thing I changed was instead of Hellphase I used Dunklephase so my park lights alternate with the turn indicators instead of working in sync with them. Mission accomplished:)
|
|