|
Post by patmoss96 on Aug 27, 2019 13:21:54 GMT
Hi new to the forum, hope someone can help me, My reverse lights don't activate when my mk7 1.4tsi is put into reverse gear, there have been upgraded taillights put in prior to me buying it and I'm not sure if the correct coding has been applied, now I know it isn't the bulbs or control units as I can activate them to run constant but not sure what I'm supposed to change in the long coding to make them activate when I in-gauge reverse, Any help is greatly appreciated.
|
|
|
Post by dv52 (Australia) on Aug 27, 2019 22:51:21 GMT
If the 2 x Leutche-sets are operating OK because you can "activate them to run constant" then check that the setting for Leuchte28RFL LC11-Lichtfunktion A 28 & Leuchte29RFL RA64-Lichtfunktion A 29 are Rueckfahrlicht.
Also, if the right-side reversing light doesn't work, your rear-view camera shouldn't operate - is your RVC working? Don
|
|