|
|
Post by golf7bazi on Aug 15, 2019 13:59:17 GMT
Hello Friends,
a few months ago I changed my 5F Discover Media Head Unit because for DAB+. I coded most by my self, but I have 2 Problems. My Car is a Highline Golf 7 Facelift Modelyear 2017
First is the Highline Skin. It should be Byte 17 where I have 05. What can I do?
Second is the maximum Volume, I hope my description is right, it's not easy for a beer drinking and Kraut eating Bavarian ;-) The Volume is going step by step louder till it reaches 60% of the volume indicator. After that the volume is going not louder till. On the old head unit I had the same but the Indikator was there by 90% and the music was much louder than now. I have 8 Speakers. Coded is "sound_system_internal" Byte 11 and is set by 01. What can I do there?
Thanks for your help
Greets from Bavaria
|
|
|
|
Post by dv52 (Australia) on Aug 15, 2019 14:19:52 GMT
^^^ a "beer drinking and Kraut eating Bavarian"? I've never met one of those - must be a very rare individual indeed!!  So - not quite sure that I understand your skinning problem - why not change Byte 17 to a skin of your choosing? As to your volume issue - please tell us how the retro fitted 5F module handled Component Protection? Don |
|
|
|
Post by vwjap on Aug 15, 2019 14:37:00 GMT
I seem to recall the volume problem is something to do with CP not been removed
|
|
|
|
Post by golf7bazi on Aug 15, 2019 15:42:32 GMT
Here in my village there are many of that :-)
The component protection was removed by the VW Dealer
Witch options I have when I change bit 17? I mean that highline background. Hope you know what I mean
|
|
|
|
Post by dv52 (Australia) on Aug 15, 2019 23:48:03 GMT
OK - so I'm not aware of any facility in adaptation channels, or in long coding in the hex5F module that controls the linearity of sound level with the volume knob angle. Perhaps someone else here has the answer, but it sounds to me like a peculiarity of the new MIB unit. Was the new module a genuine VW head unit, or was it an after market unit?
You could try looking in the engineering screen for something suitable - but be careful and make sure that you take accurate notes of ALL changes that you make. The OBD11 history file does NOT record these changes - so reverting back the values could be problematic
As to the skin question, I don't have a list of which option gives what effect. Just experiment with the options and note the default setting - they are easily changed.\\
Don
|
|
|
|
Post by Carolco on Aug 16, 2019 0:24:49 GMT
Hi.
For byte 17 Skinning I have two values. 1 or 2.
For byte 11 Sound System I have 1 Sound System Internal.
no idea for the volumen. Maybe a problem in the amplifier of the MIB unit?
Adaptation in 5F module.
check Base volume of speech output.... 50%
|
|
|
|
Post by vwjap on Aug 16, 2019 7:30:12 GMT
Ok re the volume, I found the post I was thinking off and they said “it’s a common problem that’s sorted by a firmware update from your dealer”
|
|
|
|
Post by golf7bazi on Aug 16, 2019 15:02:38 GMT
Thank u all for your help.
It's a used 5f main unit, I bought it from ebay. A new one is to expensive.
The volume is set by 50% I tried 100% with zero success.
In two weeks I bring him to the Workshop, to make the last things before he is out of Warranty. I hope they can update the Software. But I think that will not easy because this Main Unit should not in the Car and VW is so stupid when someone change some parts like me.
|
|
|
|
Post by vwjap on Aug 16, 2019 16:38:42 GMT
But you said vw removed CP so the German servers already know what you’ve done
|
|
|
|
Post by golf7bazi on Aug 16, 2019 19:32:36 GMT
Yeah they know it, the Diagnostic Tester said that the Hardware is not correct. He only removed the Component Protection but he was not able to make the Coding and the Anpassung. So I think he will say the same when I want to make a Software Update
|
|
|
|
Post by golf7bazi on Aug 28, 2019 18:31:51 GMT
So guys I think I am too stupid, I tryed today to activate my highline skin. No one of that skins are making me happy. I want at the start of the unit in the background of "welcome to Volkswagen" the world map. What must I do? I could cry
|
|
|
|
Post by falschi on Aug 29, 2019 13:06:07 GMT
Hi my Kraut-eating friend, Markus the beer drinking and würstl eating guy from Vienna here  Byte 17 should be the one to active the carbon style, you're looking for byte 18: 00 - Highline
01 - Hybrid
02 - GTD
03 - GTI
04 - BlueMotion
05 - E-Golf
06 - R-Line
07 - Golf R
After changing the value you have to restart the MIB by pressing the on/off-button for about 10 seconds.
My Golf is MY19 and I've the same issue with the volume-bar, but haven't changed anything in coding or adaptions, so I think it's caused by a buggy firmware. Try to get an update from your VW dealer.
Let me know, if it's working later, otherwise I can have a look to the standard-coding in my 5F.
Best regards
|
|
|
|
Post by golf7bazi on Aug 29, 2019 13:37:46 GMT
Hallo Mei Würst Essener Helfer, über Byte 18 lässt sich noch das ändern was nach welcome to Volkswagen angezeigt wird. Aktuell habe ich rline nach dem welcome. Ich will aber zusätzlich dazu die Weltkarte als Hintergrund haben, ebenso dass der aktuelle Radiosender hell hinterlegt ist. Ich hab es gerade eben noch einmal versucht, ohne Erfolg, ich bin am verzweifeln.
|
|
|
|
Post by falschi on Aug 29, 2019 14:13:16 GMT
Hi, vielleicht erstmal die neuste Firmware aufspielen lassen... Mit Weltkarte meinst du wie hier:
Ist eine komische Geschichte. Das Stg 5F ist neuer als das alte ohne DAB+?
Grüße
|
|
|
|
Post by golf7bazi on Aug 29, 2019 20:10:16 GMT
Ja genau, diese meine ich. Dann muss ich wohl mal ein Update machen, hoffe das klappt
|
|
|
|
Post by golf7bazi on Sept 3, 2019 17:20:36 GMT
Today I made the software update. I hav now the actually software on but nothing changed. I hod so big hopes. I tried it in the engineering mode but there I have only two vw and one MAN skin to choose.
And my volume problem is still there.
Hope someone can help me
|
|
|
|
Post by golf7bazi on Dec 25, 2019 18:12:25 GMT
Hello @ all and merry Christmas,
I tried much but my Problems with the maximum volume is still there. A vew days ago I changed the settings in the equalizer, but nothing happened there when I made some changes. Maybe anybody of u has now any idea? Could it be that in the car where my head unit was from had a plug and play subwoofer in the back?
The problem with the Highline skin is fixed, because this skin is since a vew model years not available. New Golf 7 Highline don't have this skin too.
|
|
|
|
Post by dv52 (Australia) on Dec 26, 2019 7:34:29 GMT
bazi: I'm really not sure that I can help, but post-up a scan report so I can see the long-code strings on ALL your modules
Don
|
|
|
|
Post by vippolito on Jan 2, 2021 22:29:37 GMT
In all this poutpourri you all forgot put the part number of old 5f part number of new 5f, OLD SW VERSION AND NEW SOFTWARE VERSION
|
|
