mh
New Member
Posts: 3
|
Post by mh on Sept 10, 2016 7:27:27 GMT
Hi to all of you, I am totally beginner of using the obdeleven. I tried to get the following things to work: 1.) Lock Acknowlegde with Horn 2.) Folding Mirror when Doors Lock 1.) What I did: - Select 46 menue - select Coding (no long coding available?) - the value is 3547377 - How can I add +2048 ?? 2.) in menu 42 and 52 byte 4, bit 6 are active, nothing happens when I lock the car. On which position should the mirror switch stand? Hope you can help me. Thank you Vielleicht klappt es auf deutsch besser Ich würde gerne mit einen Ton das Auto quittieren (DWA). Wenn ich in das Menu 46 und dann auf Codierung gehe, steht standardmäßig der Wert "3547377" da. (Lang Codierung wird mir nicht angeboten) Wenn ich nun 2048 addieren soll, komme ich bei einigen Werten über "10", wie soll das gehen? Für das anklappen der Spiegel sind die Werte im Menu 42 und 52 bei Byte 4, Bit 6 aktiviert. Leider passiert nichts. Wo muss der Spiegelschalter stehen? Danke
|
|
mh
New Member
Posts: 3
|
Post by mh on Sept 11, 2016 13:01:11 GMT
Nun auch nochmal mit Bild: Lock Acknowlegde with Horn: Folding Mirror:
|
|
mh
New Member
Posts: 3
|
Post by mh on Sept 18, 2016 16:57:59 GMT
Thanks for your support...Bought your stuff for a lot of money and you try not to help...
|
|
|
Post by Daniel (Germany) on Sept 19, 2016 15:04:32 GMT
May no one here knows the answer for your question. For your question with mirror switch the answer is ,the switch must be on position folding mirror (position between mirror switch and window switch). Its just a littlr community here and may there is not abanswer to every problem. Often you can find also help in web. Im sure that everyone here like to help you with your problems if he knows a answer. So when the picture is from your car i ask me the question why you can not fold the mirrors because you have the switch. Is it original factory installed or did you install it later? When its later installed may there are no parts inside the mirror to fold them.
|
|
|
Post by Daniel (Germany) on Sept 19, 2016 15:34:00 GMT
Aber du bekommst dazu ja nicht nur hier keine hilfestellung sondern bei mt auch nicht wirklich. Aber probiere doch einfach mal den bei mt angegebenen wert und deinen errechneten aus. Notiere vorher den original wert.
|
|
|
Post by phil on Mar 27, 2017 15:37:39 GMT
Hello there, did you have any luck getting the mirrors to fold on locking? I'm trying my self at the moment and having problems!
|
|