|
Post by phntsm on Jul 29, 2019 18:59:46 GMT
Around 2 weeks after using the windows from remote app, both of my front windows stopped working. I could hear them click up, but nothing when trying to roll them down. I tried setting the app value back to off but this had no effect.
At first I wasn't sure if this was related to the app (maybe a fuse went?) so I brought it into the dealer to see what was up. After a few strange looks they told me that the car thought the windows were in the down position when they remained in the up position. (Which explains the clicking sound when trying to key them up.)
After changing the value in the car's computer, the windows resumed normal functioning. Has anyone seen this before? I did a brief scan of the forum and didn't see anything.
If something like this were to happen again, is there a way to fix it myself rather than bringing it back to the dealer and raising suspicions? The tech found it "very strange."
|
|
eli
Full Member
Posts: 129
|
Post by eli on Jul 30, 2020 8:33:41 GMT
I'm going through this ... Do you know how to fix it? Does anyone know how to reset or calibrate the electric window system?
|
|
|
Post by vwjap on Jul 30, 2020 15:53:47 GMT
Wind the window down and hold the button down for 5 seconds after the window gets to the bottom, then wind the window up and hold the button up for 5 seconds after window has reached the top
|
|
eli
Full Member
Posts: 129
|
Post by eli on Jul 31, 2020 3:38:53 GMT
Do this in each window individually?
|
|
|
Post by vwjap on Jul 31, 2020 5:28:17 GMT
That’s how you calibrate them, I think it’s if they don’t auto roll you do it to that window,
|
|
eli
Full Member
Posts: 129
|
Post by eli on Jul 31, 2020 14:17:11 GMT
Are these commands made in the driver's window using the four buttons at once or each one individually?
|
|
|
Post by vwjap on Aug 1, 2020 15:47:23 GMT
As far as I’m aware just check to see if the window rolls up automatically, if I’d doesn’t do the calibration on that window
|
|
eli
Full Member
Posts: 129
|
Post by eli on Aug 2, 2020 5:50:58 GMT
Guys, I connected lights on the internal door handle directly on the positive and negative of the windows and installed the rear door exit lights just like this video on youtube . With the internal lights off everything works perfectly. However, when turning on the internal lights, the windows do not go down, they only go up. Could anyone help? Did he unset the windows?
|
|