|
Post by robert802 on Jul 27, 2019 16:17:40 GMT
I absolutely hate the engine stop-start on my new 2019 Audi TT S-line Roadster. We were able to disable that function on my wife's 2017 SQ5 by going into the MMI and turning the feature off. I went into the MMI with the 2019 TT, and stop-start was not there. Has anyone found out a way to disable this annoying function? There is a button to disable the function, but the current action should be toggled. The current action has stop-start active (light off) at start up, and disabled when button is depressed (light on). Is there a way to toggle this with ODBeleven? Have stop-start disabled (light off) at start up, and enabled when button depressed (light on).
|
|
|
Post by adiwob on Jul 29, 2019 6:05:23 GMT
|
|
|
Post by robert802 on Jul 29, 2019 13:30:26 GMT
Can this VCDS coding work with OBDeleven? and Would this work for a 2019 Audi TT S-line?
Originally Posted by S-Fredo View Post Hello to everyone,
Here is a way to disable Start & Stop on recent cars (tested on my Audi A5 3.0 TDI S-Tronic Sportback FL-MY2012):
- module 09-Cent. Elec. - enter Security Code (should be showed up by VCDS) - Adaptation on Channel 34: subtract 4 to the value --> Start&Stop always disabled add 32 to the value --> memorize last status (the Start & Stop status at engine startup will be the one at last engine shutdown) - test & save
In addition of these values, if you add 64 to the value, the Start & Stop button light will be reversed: off if Start & Stop is disabled, and on if Start & Stop is enabled.
For example, on my car, the value was 28. I entered 60 as new value to memorize last status.
Enjoy Fred
|
|
|
Post by adiwob on Jul 29, 2019 14:18:09 GMT
Yes it's the same with obdeleven.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2019 18:02:49 GMT
You can also buy a stop start memory module so that by default its turned off but with a push of the button it can be back on again.
|
|
|
Post by jclew88 on Dec 27, 2019 17:18:57 GMT
You can also buy a stop start memory module so that by default its turned off but with a push of the button it can be back on again. I saw that before from some online store but is for other Audi model. Do you mind to share the link for TT use? Thanks:)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 28, 2019 15:23:57 GMT
|
|
hv
New Member
Posts: 5
|
Post by hv on Dec 29, 2019 7:26:11 GMT
Can this VCDS coding work with OBDeleven? and Would this work for a 2019 Audi TT S-line? Originally Posted by S-Fredo View Post Hello to everyone, Here is a way to disable Start & Stop on recent cars (tested on my Audi A5 3.0 TDI S-Tronic Sportback FL-MY2012): - module 09-Cent. Elec. - enter Security Code (should be showed up by VCDS) - Adaptation on Channel 34: subtract 4 to the value --> Start&Stop always disabled add 32 to the value --> memorize last status (the Start & Stop status at engine startup will be the one at last engine shutdown) - test & save In addition of these values, if you add 64 to the value, the Start & Stop button light will be reversed: off if Start & Stop is disabled, and on if Start & Stop is enabled. For example, on my car, the value was 28. I entered 60 as new value to memorize last status. Enjoy Fred Has anyone tried adding 32 to the value to confirm if it works memorising the previous status? (I'd rather have this than turning it off completely).
|
|
|
Post by jclew88 on Dec 30, 2019 16:58:13 GMT
Can this VCDS coding work with OBDeleven? and Would this work for a 2019 Audi TT S-line? Originally Posted by S-Fredo View Post Hello to everyone, Here is a way to disable Start & Stop on recent cars (tested on my Audi A5 3.0 TDI S-Tronic Sportback FL-MY2012): - module 09-Cent. Elec. - enter Security Code (should be showed up by VCDS) - Adaptation on Channel 34: subtract 4 to the value --> Start&Stop always disabled add 32 to the value --> memorize last status (the Start & Stop status at engine startup will be the one at last engine shutdown) - test & save In addition of these values, if you add 64 to the value, the Start & Stop button light will be reversed: off if Start & Stop is disabled, and on if Start & Stop is enabled. For example, on my car, the value was 28. I entered 60 as new value to memorize last status. Enjoy Fred Has anyone tried adding 32 to the value to confirm if it works memorising the previous status? (I'd rather have this than turning it off completely). Not sure if it is only me. When I go to unit 9 -> adaption I can’t see anything as Chennel 34(or byte 34). Is it different menu name in OBDeleven?
|
|
hv
New Member
Posts: 5
|
Post by hv on Jan 2, 2020 0:10:23 GMT
[quote author=" jclew88"[/quote]Not sure if it is only me. When I go to unit 9 -> adaption I can’t see anything as Chennel 34(or byte 34). Is it different menu name in OBDeleven?[/quote] Did you try going to the Security Code first? I've only just got my device recently and I think some menu items appear after pressing through the SecUrity code menu first and selecting one of the "codes". I'm not very mobile at the moment with a health condition and my car is in the carpark but I'll try it when I'm at my car next.
|
|
hv
New Member
Posts: 5
|
Post by hv on Jan 25, 2020 6:45:17 GMT
Confirming that I can't see Channel 34 either.
|
|
|
Post by pauliku on Jul 11, 2021 17:43:41 GMT
Hello,
I confirm that I don't have channel 34 on audi TT mk3 2016, I have something 'leuchte34'but not channel 34 and nothing related to 'start/stop'
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 11, 2021 17:56:11 GMT
Just to explain the difference that you guys are seeing. On older car/van and some more modern ones the control units protocol is something like KWP2000. When you have one of these style control units then when you go to Adaptition the first screen you will see will show Enter channel and there is a drop down list so you can see the channels where they have names/descriptions However on Newer control units with the Protocol of CAN: UDS then when you go to adaptation you will see a list of the various Adaptation in a list. Thus the coding you are seeing for channel 34 is for older style control units and does not work on newer style ones. Hope that makes sense
For the MQB Platform cars adiwob instructions will turn it off or you can buy a stop start memory module that will keep the last setting used when you restart the car.
Hello, try this: 1) Select Control unit 19
2) Select Adaptation
3) Select Stop start limit voltage
4) Change value to 12 (default is 7.6)
5) Press the green tick to confirm.
Read more: forum.obdeleven.com/thread/6373/disable-start-stop?page=1#ixzz5v2mjenBZ
|
|
|
Post by kevin34 on Dec 2, 2022 16:52:51 GMT
just as an info share, no way to disable start&stop on '20 YM onward vehicles via coding, I had to install an external module (the ASR one)
|
|