|
|
Post by tategti on Jul 20, 2019 3:48:05 GMT
Hey everyone,
I just installed urban joke v2 for LEDs app on my 2016 GTI.
It works perfectly for the turn signals and hazards, but there is now a problem with the brake lights.
When the tail lights are off, all 4 brake lights work.
When the tail lights are on, only the outer right brake light is illuminating. The inner right and both left brake lights aren’t working.
Is this a common issue with an easy fix? All I did was the one click app, I have not done any other coding to the car.
Any help is most appreciated!!
-Adam
|
|
|
|
Post by dv52 (Australia) on Jul 20, 2019 5:01:02 GMT
^^^ hmm..... that's mighty strange! Why not compare the settings in my table below with the actual setting on your car? Don  |
|
|
|
Post by tategti on Jul 20, 2019 5:17:45 GMT
Thank you. I don’t have the pro version, but if I upgrade I will be able to compare my values to yours in the chart then right?
|
|
|
|
Post by dv52 (Australia) on Jul 21, 2019 0:13:49 GMT
^^^ I'm not sure what capabilities the non pro dongle has with respect to adaptation channels (other than you can't change settings. Will your current dongle allow you to access (but not change) these settings?
Don
|
|
|
|
Post by tategti on Jul 21, 2019 1:05:57 GMT
I’m not sure either. According to ShopDap, I can purchase the pro access code and have full functionality with the dongle so that is what I am going to try. I may try uninstalling the basic Urban Joke app first and reinstalling it to see if that works. Is that a good idea?
Thank you again for your help!
Adam
|
|
|
|
Post by dv52 (Australia) on Jul 21, 2019 1:23:06 GMT
^^^ adam - it's up to you. In the current state, I suspect that your car isn't road-legal. There are many steps in manual coding this tweak - but with care it is easy IMO
Don
|
|
|
|
Post by tategti on Jul 21, 2019 20:51:17 GMT
I’ll try it manually. Thank you for your help Don!
|
|
|
|
Post by tommygun4614 on Sept 1, 2019 20:13:21 GMT
I've configured the way provided above but my rear amber lights are on when my headlights are on. Is that how it is to be with the urban joke? I can provide screenshots of my settings
|
|
|
|
Post by dv52 (Australia) on Sept 1, 2019 23:46:45 GMT
^^^ You can read which lights are changed from the headings on each of my 4 x tables (that's why I included the information).
Don
|
|
|
|
Post by ledger on May 28, 2021 6:43:39 GMT
Hello I have use your code for urban joke, but both side only inner light is work outside is not work do u know why?
|
|
|
|
Post by dv52 (Australia) on May 29, 2021 20:21:42 GMT
ledger: hmm......... the problem could have any number of causes. Since the only piece of information that you have provided is that there is a problem, I can't help - alas! Don
|
|
