|
|
Post by reddragonaus on Jul 11, 2019 2:29:18 GMT
I did an adjustment to firm up the brake feel on a friends new Superb today.
It was the same process as my S3
Module 03 Brakes
Adaptations
Brake Booster: factory value set to 4.
The lower the value the more firm the feel.
I set it to for Better feel and nice and firm braking force.
Code 25004
A few dash lights came on then went off when the car was started.
Pedal feel is much more firm and direct without the previous spongy feel.
And yes it has new brake fluid.
|
|
jst
New Member
Posts: 2
|
Post by jst on Dec 10, 2019 20:05:54 GMT
Default 04 and you change it to 03,02,01 ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2019 20:17:59 GMT
On my Leon you can change it from 04 to 01 with none of the other levels.
You do get lots of warning lights on but once you drive off they all clear and dont come back again.
|
|
jst
New Member
Posts: 2
|
Post by jst on Dec 10, 2019 20:30:58 GMT
On my Leon you can change it from 04 to 01 with none of the other levels. You do get lots of warning lights on but once you drive off they all clear and dont come back again. You set it from factory 04 to 01? I have set my car from 04 to 03. But have fear for a lower value beacause i don't know what it actualy do |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2019 20:54:57 GMT
Its been a while since I tested this out but what I always say on these changes.
Find yourself a nice quiet road and make the changes, drive slow and see what happens, If you are not sure then don't make the change.
From memory what it is doing is changes the brake pedal feedback so its much more responsive than stock.
|
|
|
|
Post by hoesty on Oct 20, 2020 5:03:19 GMT
I did this today in my Audi q3, the factory setting is on 0 Only options that are preset other than Factory are 2 and 3 2 - North American Region & Japan 3 - Rest of World without Hydraulic Brake Booster The warning error comes up on dashboard "brakes malfunction contact workshop" The faults cant be cleared through the Brakes (03) but it can be cleared when I change back to the factory setting which is 0. The brake feels really good nice and firm on mode level 3 How can this error be coded out when setting it to my preferred brake pressure on Level 3?  |
|
