|
|
Post by mathielv on Jul 5, 2019 14:23:19 GMT
I did a reset on steering assistance by mistake and now i got many error codes, park assist, brakes, adaptive cruise, and many other. The error code on steeri g assistance modul is : steering angel sensor no basic setting.
Please help guys
|
|
|
|
Post by mathielv on Jul 5, 2019 18:31:40 GMT
Hello, which contact do i remove? The obdeleven or do you mean battery contact
|
|
|
|
Post by mathielv on Jul 5, 2019 18:32:04 GMT
how can I calibrate the steering angle ?
|
|
|
|
Post by dv52 (Australia) on Jul 6, 2019 0:04:58 GMT
how can I calibrate the steering angle ?
Steering Angle (G85) calibration procedure - MQB platform vehicles
- Select Steering assistance module @ address hex44
- Select Basic settings
- Select Steering angle sensor (5th option in my screenshot below)
- Activate the procedure (It should show running when activated)
- Turn the steering wheel slowly to the right to mechanical stop and then to the left mechanical stop.
- Turn the steering wheel back to the mid position
- Wait for basic setting procedure to show finished correctly?
- Exit basic setting function and clear any DTCs
 Don |
|
|
|
Post by dv52 (Australia) on Jul 7, 2019 1:08:00 GMT
^^^ OK- 5th option is now the correct choice. Lot's of possible causes for your problem:
- Is ignition-ON, engine OFF?
- What country?
- What year-build?
- What version mk7?
- Are you using PRO option OBD11?
- Have you tried clearing the APP cache on your tablet/mobile-phone before running OBD11 software?
Don |
|
|
|
Post by johnny22 on Jan 10, 2020 3:42:34 GMT
I got the same problem Steering angle(g85) already try all the steps but at the end doesn't let me finish cant erase or do the basic settings help plz
|
|
|
|
Post by anotheraudifan on Oct 20, 2020 6:17:48 GMT
Hey mathielv, did you ever find a solution to this? Your help is much appreciated. Im in the same boat
|
|
|
|
Post by Claudiu on Nov 5, 2020 5:11:48 GMT
I have that problem also on my Touran 5T . Where i find that menu ? I have pro version but i can not find it. Thank you
|
|
|
|
Post by michaelr on Sept 5, 2023 18:33:24 GMT
I am having the same problem with this g85 reset procedure it says to activate and wait till it's complete but I don't know if it's running all I see is the red stop button never turns off how do I know if it's activated and when it's complete?
|
|
