|
|
Post by profmauro on Jul 3, 2019 10:14:48 GMT
Hi, I activated using app obdeleven and 10Credits, Battery Charge level, it gave me a positive result, but I can't find where to set it on the instrument panel, suggestions? Thank you
|
|
|
|
Post by aussietig on Jul 30, 2019 3:49:06 GMT
Have tried to do it several times and like you it says it accepts it but doesnt do anything.
On another forum a poster suggested that you need more than just a negative strap to a bolt on the car and it needs to have a box of some sort there and most havent so it wont work You can see it on your phone though if you open the program
|
|
alek
New Member
Posts: 7
|
Post by alek on Jul 30, 2019 7:14:04 GMT
OBDeleven is also said (see apps requirements) that vehicle must have battery control unit. Without that unit impossible to view battery check using car display
|
|
|
|
Post by profmauro on Aug 18, 2019 16:00:20 GMT
will be that. but the credits took them the same. usually if it is not comparable the program does not make you do it
|
|
|
|
Post by aussietig on Aug 19, 2019 11:54:41 GMT
will be that. but the credits took them the same. usually if it is not comparable the program does not make you do it Did on mine did it twice and reversed it and lost 40 credits |
|
|
|
Post by merts75 on Feb 4, 2020 20:10:34 GMT
It says you have to hold the reset trip button with ignition off. You can’t do that with AID as it doesn’t have a button, all electronic. So this app shouldn’t even be there!
|
|
Reihenmotor5
Full Member
Editing mod doc, coming to submit more OCAs
Posts: 186
|
Post by Reihenmotor5 on May 6, 2020 10:54:28 GMT
The reset trip is by pressing and holding the 0.0 button through there you can reset your service warning and see the battery SOC. You can’t add that info to the Driving Info screen on the AID.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 6, 2020 14:28:34 GMT
If this is the same as my MQB Series car this only works with ignition off by pressing the 0.0 button and cycle to SOC value.
|
|
