|
|
Post by datoby on Jun 4, 2019 11:08:22 GMT
Hello,
i have Front Assist installed at my car. I can set if the warning of FA will be early, medium, late or disabled. If i set disable, it works until i turn ignittion off. When i start car again, it automatically switch to late warning and it is pretty annoying. Is there any way to have option Disabled pernamently without setting it everytime i start a car?
Thanks.
|
|
|
|
Post by newty on Jun 4, 2019 14:15:41 GMT
Nobody tried - why should you want to do this? When the ACC works as it should, there is no impact on street-compatible driving.
Edit: You could try "Turn off assistant intervention" and "... warning" - don't know if this gets accepted and if this is working on the Front Assist.
Legal notice: Permanently turning off safety features of your car will void type approvals and might be a problem with your insurance and regular checkups like TÜV testing
|
|
|
|
Post by datoby on Jun 18, 2019 11:53:23 GMT
I am not talking about ACC. The point is, that FrontAssist beeps when i am close to other car (for example if the car infront of me turns right and I am getting closer, i know he will pass away, but my car does not). It is possible to turn off this annoying beeping temporary (via multimedia UI), but it beeps again after next start up. The point is, i want to disable beeping forever, not only temporary. It has to be possible, just dont know where  any ideas ? |
|
|
|
Post by chsheriff on Jul 3, 2022 8:43:51 GMT
I would be interested in that as well. No one has an idea?
|
|
|
|
Post by dv52 (Australia) on Jul 3, 2022 23:57:32 GMT
hmm.......... so, if I understand correctly - the problem to be solved here is to make the car remember the warning settings for FA that the driver selected on the previous ignition ON cycle. The FA function is the result of the front radar module that lives @ address hex13 on the CAN network and which OBD11 calls Adaptive Cruise Control.
Now, there are a few variations of the hex13 module that have been fitted on MQB platform cars, but the P/N of the module that generally applies to FA function is 5Q0907572 - which is a MRR (Middle Range Radar – up to 160m).
Please check that this is the module fitted to your car.
So, on the long-code string for the hex13 module above (again, check to make sure that this applies), the descriptor for the software switch on Byte 11, Bit 4 is: - Default value AWV pre warning (note: AWV=AnhalteWegVerkürzung=Stopping Distance Reduction)
And, the setting values for this software switch are: - 0= Default
- 1=Last setting
On cars that don't remember the FA warning settings on the previous ignition cycle, the status of this software switch is set to default.
Don
|
|
