vrsc
New Member
Posts: 6
|
Post by vrsc on May 28, 2019 14:23:58 GMT
This feature is standard on my car and worked perfectly. I think that I tweaked something and now it doesn’t work. Is there another central Electronics that over writes this feature? I have both features checked in the long coding and it still doesn’t work. Any help would be appreciated
|
|
|
|
Post by vwjap on May 29, 2019 8:00:47 GMT
Really silly question, have you got it enabled under settings in the MIB?
|
|
vrsc
New Member
Posts: 6
|
Post by vrsc on May 29, 2019 20:17:58 GMT
I do. I've toggled off and back on a couple times in my MMI settings.
I've even uncheck each and recheck in long coding to no success. That's actually one stock setting I really enjoyed and have been racking my brain to find the fix and what app/setting over write it and why it's not working. Hopefully someone can assist
|
|
|
|
Post by vwjap on May 29, 2019 20:33:16 GMT
Did you have it on auto or manual?
|
|
vrsc
New Member
Posts: 6
|
Post by vrsc on May 29, 2019 23:02:27 GMT
I've always kept my headlight switch on auto and it's still set there
|
|
|
|
Post by vwjap on May 30, 2019 7:27:28 GMT
No manual is you have to flick the high beam lever
|
|
vrsc
New Member
Posts: 6
|
Post by vrsc on May 31, 2019 18:04:32 GMT
I’ve never needed to do that. The lights have always been set on auto and the LH/CH LIGHTS have worked.
When I got my OBDeleven, I installed a few apps using my credits and them did one long code adjustment. I’ve since set my long code back to the original old code but LH/CH lights still don’t work.
I am thinking one of the apps I installed over write my LG/CH feature?
|
|
|
|
Post by vwjap on May 31, 2019 21:06:54 GMT
But does it work if you pull back on the flasher then get out the car
|
|
vrsc
New Member
Posts: 6
|
Post by vrsc on Jun 6, 2019 23:08:08 GMT
No
|
|
