|
|
Post by Matthew on Jul 12, 2017 20:21:13 GMT
I'm sorry. I overlooked it. I'll look at the coding on my car later today and record a video to see if yours matches this one.
|
|
|
|
Post by ewmin3m on Jul 12, 2017 22:22:59 GMT
OK, so I did the following: 1. I inserted the 46 Comfort Module code: 93C803281B0901AF880A048050CC into LCODE.exe 2. I clicked the Read Info file to insert the infos and I was given 3 options: 46-8P0-959-433-12byte.xpl 46-8P0-959-433-13byte.xpl 46-8P0-959-433-14byte.xpl I loaded the 14byte.xpl since my code is 14bytes. 3. Given that I could see the bit descriptions for each byte I made the following modifications: Byte00: ![]()  Byte05:  Byte06:  Byte07:  4. After applying the respective mods via odbeleven the following happened: - the lock button press on the remote stopped working - the unlock button press on the remote made the car double flash and double honked and locking/unlocking the door - holding either buttons didn't make the windows go up or down. 5. Obviously not the expected behaviour so I just went back to the previous long coding for the respective module of 93C803281B0901AF880A048050CC Any thoughts and recommendations would be nice. |
|
|
|
Post by Matthew on Jul 17, 2017 23:21:46 GMT
You've followed the correct set of steps. I'm just wondering if the label file you selected was the correct one. Give me some time to look into this for you.
|
|
|
|
Post by ewmin3m on Jul 18, 2017 17:49:40 GMT
Cool that'd be great. Thanks  You've followed the correct set of steps. I'm just wondering if the label file you selected was the correct one. Give me some time to look into this for you. |
|
