|
Post by maxwrt on May 15, 2019 16:31:17 GMT
but the access codes are necessary because I have seen other similar procedures for OBDeleven but I do not have an access code. It's possible?
Disable start / stop [WORK]
1. Control unit 19 (Gateway)
2. Adaptation
3. Initial start / stop voltage limit: change the value to "12V" [Standard: "7.6V"]
|
|
|
Post by Thirsty on May 15, 2019 17:57:06 GMT
Please consider writing in english because it's the main language here and it'll be easier for others to help you.
|
|