lylo
New Member
Posts: 10
|
Post by lylo on May 11, 2019 20:32:31 GMT
Hi all
Need assistance with coding the front Turn Signal LED lights, can it be done like the rear ones
|
|
|
|
Post by vwjap on May 11, 2019 20:48:32 GMT
Nope, someone did make a front headlamp that did, there’s a video in the codings and adaptions somewhere
|
|
lylo
New Member
Posts: 10
|
Post by lylo on May 11, 2019 20:50:30 GMT
I thing the Audi's do it, if I'm not mistaken
|
|
|
|
Post by vwjap on May 11, 2019 21:04:05 GMT
Maybe they do. But it’s different hardware, but knock yourself out trying dude
|
|
|
|
Post by Carolco on May 12, 2019 10:54:14 GMT
I have not seen that coding so far ....
I've seen dynamic turn signals in the rear-view mirror, but it's dynablink hardware and Chinese too.
|
|
|
|
Post by vwjap on May 12, 2019 12:15:43 GMT
Just to be clear, you do mean the side mirrors have dynamic indicators fitted and NOT seen someone behind you with dynamic front indicators
|
|
|
|
Post by dv52 (Australia) on May 13, 2019 0:58:35 GMT
^^^ As indicated earlier - "dynamic" or "LED-chaser" turn-signal lamps require special hardware to produce the sequencing effect - it can't be done through simple programming with OBD11. The rear tails have this hardware, the front turn-signal fittings (factory built) don't have this circuitry- alas
Don
|
|
|
|
Post by danboost on Aug 16, 2019 21:53:22 GMT
Maybe an idea to try via coding;
The inside indicator 2 sec ON and the outside indicator 1sec ON that gives a bit of a fake dynamic indicator effect I think!
2sec ON __/__/ 1sec ON, both off, 2sec ON __/__/ 1sec ON, both off etc.
|
|
