|
|
Post by itblerimzeqiri on May 3, 2019 20:27:50 GMT
Dear all, if you could explain to me from your experience, I have just scanned my vehicle with OBDeleven and found out ACC with some errors like U112300 and U140000. So I’m not sure if I have ACC on my vehicle because I can’t engaged while driving or I have only CC ( Crouse control which already works fine ). Thanks for your time!  |
|
|
|
Post by ofektal8 on May 4, 2019 7:17:06 GMT
Dear all, if you could explain to me from your experience, I have just scanned my vehicle with OBDeleven and found out ACC with some errors like U112300 and U140000. So I’m not sure if I have ACC on my vehicle because I can’t engaged while driving or I have only CC ( Crouse control which already works fine ). Thanks for your time! You do have ACC, but if you cant engage it then the errors in your ACC module are probably the reason, take a screenshot of the faults. |
|
|
|
ACC
Dec 18, 2019 16:08:57 GMT
via mobile
Post by bigotti on Dec 18, 2019 16:08:57 GMT
Hello, today i calibrate my acc on my Passat B8 2015, at the dealership VW , because the light come ON , in the dashboard, and when i tried to activate acc, told me on the screen ACC is on error. Everything work good now, after calibration, but i scan the car and give me this Error.
Can someone to say why stil i have errors after calibration? I recognize before to calibrate ACC , i change some BIT/BYTES , But after calibration should not be same like on factory settings? If not, can somebody show me picture with settings from factory (BIT /BYTES) please.
OBDeleven vehicle history log
Date: 2019-12-18 14:43
VIN: WVWZZZ3CZGE080572
Car: Volkswagen Passat
Year: 2016
Body type: Saloon
Engine: CRLB 110 kW (150 HP) 2.0 l
Mileage: 203509 KM
13 Adaptive Cruise Control
System description: ACC BOSCH MQB
Software number: 3Q0907572B
Software version: 0192
Hardware number: 3Q0907572B
Hardware version: H04
ODX name: EV_ACCBOSCHVW48X
ODX version: 001008
Faults: U112300 - Databus error value received
Intermittent
Date: 2019-12-18 10:57:34
Mileage: 203484 km
Priority: 6
Malfunction frequency counter: 7
Unlearning counter: 173
Dynamic environmental data: 028D4D02857D1011000010120000102E02
|
|
|
|
ACC
Dec 19, 2019 9:08:25 GMT
Post by newty on Dec 19, 2019 9:08:25 GMT
First: Its intermittent, not static, so just thrash it and see if it comes again
Second: This error comes up when the ACC receives and error from another control unit by the databus, so the ACC knows that there is an error in a system it communicates with and normally relies on its data.
So just thrash that error and rescan after some days
|
|
|
|
ACC
Dec 19, 2019 10:15:08 GMT
via mobile
Post by bigotti on Dec 19, 2019 10:15:08 GMT
Thanks for your answer. I will do it today, and i will come back with news in few days.
|
|
