|
Post by ikhlas0006 on Feb 22, 2019 18:22:37 GMT
Code 31357 gives me error... any idea? Using on 2015 audi a8
Any idea?
|
|
|
Post by dv52 (Australia) on Feb 23, 2019 0:45:38 GMT
Code 31357 gives me error... any idea? Using on 2015 audi a8 Any idea? ikhlas0006: hi
AFAIK the Audi A8 is built on a MLB platform -I think. The cars that are the subject of this particular forum (like the mk7 Golf, and Audi A3) are biult on a MQB platform. Very different CAN network topologies and very different adaptation channel arrangements in their software architecture
This is a long way of suggesting that the comfort windows tweak that is described here might not be compatible with your car - alas
Don
|
|
|
Post by underbiteman on Jan 17, 2020 17:08:41 GMT
PS: If you want the facility to operate with KESSY do this:
- Search for access control 2 (as above)
- Select Kessy komfort schilessen and set to active
Just adding that on my 2017 GTI Sport (US) has Kessy Komfort oeffnen & Kessy komfort schilessen under Keyless access and start authorization
|
|
|
Post by voltgti on Aug 28, 2020 5:29:45 GMT
Thanks for this. Does anyone know of a way to disable the sunroof from opening and closing with the rest of the side windows? Cheers.
|
|
|
Post by claudiorocha07 on Feb 12, 2021 1:23:43 GMT
Hello guys. I did this Instructions, but the 2021 T-Cross in Brasil, don't have original radio, because of this. I can't the select enable or disable in the radio. Any idea in this case?
|
|
24v
New Member
Posts: 1
|
Post by 24v on Jul 15, 2021 23:53:52 GMT
Hello, I know this is an old post. I am new to OBDeleven and I am trying to make this function work. I am wondering if I just don't have a proper understanding and I was hoping for some help. I did all of this... Select Central Electrics (address hex09) Select Security Access Enter the magic number 31347 Select Adaptation Search Access Control 2 (it's the third entry from the top of the list) and select. Note: in newer vehicles, search for ZV Komfort Select comfort opening and set to active Select comfort closing and set to active Select funk komfort oeffnen and set to active Select funk komfort schilessen and set to active Select Menuesteuerung komfortbedienung einstellbar and set to adjustable (this step places a panel in the MENU screen that allows this function to be enabled/disabled)
Then I also did this..
Search for access control 2 (as above) Select Kessy komfort schilessen and set to active Then I did this...
Make sure that the windows are fully closed (i.e. in the up-position) Press and hold-down the down button for at least 3 seconds after the windows are fully open (i.e. in the down-position Press and hold down the up button for at least 3 seconds after the windows are fully closed (i.e. in the up-position) Repeat a few times, then try comfort/convenience opening
I also set the convenience opening in the menu on the radio and set it to all windows.
If I understand this feature correctly, I should be able to hold the lock button on the remote and the car will lock and windows will roll up, and I should be able to hold unlock and car unlocks and windows roll down. I believe this should also work by holding he outside door handle because I set the Kessy komfort schilessen and set to active.
I have redone all of these at least 3 times and I cannot make this feature work. The car is a 2015 GTI. I cannot figure out what I am doing wrong. Does anyone have any advice for the noob?
|
|
|
Post by joshdhiwa on Mar 18, 2022 15:03:17 GMT
hi did all the steps works??
|
|
|
Post by falcon on Mar 18, 2022 16:55:03 GMT
Reads ok at first. Did you press the remote control button up or down long enough? With my Golf it takes 1-2 seconds before something happens even though it has already been locked. And then you have to keep it pressed until everything is closed.
Did you activate it in the MMI menu?
|
|
|
Post by jthomas on May 10, 2022 14:25:06 GMT
- Select Central Electrics (address hex09)
- Select Security Access
- Enter the magic number 31347
- Select Adaptation
- Search Access Control 2 (it's the third entry from the top of the list) and select. Note: in newer vehicles, search for ZV Komfort
- Select comfort opening and set to active
- Select comfort closing and set to active
- Select funk komfort oeffnen and set to active
- Select funk komfort schilessen and set to active
- Select Menuesteuerung komfortbedienung einstellbar and set to adjustable (this step places a panel in the MENU screen that allows this function to be enabled/disabled)
Here's a screen shot of the process above (after the security code section)
Don
PS: If you want the facility to operate with KESSY do this:
- Search for access control 2 (as above)
- Select Kessy komfort schilessen and set to active
|
|
|
Post by jthomas on May 10, 2022 14:27:18 GMT
New here. Just got a 2017 GTI and I'm trying to get the windows down with the remote. When using my OBDELEVEN it says "not supported " for the windows remote access and I did the coding as said in the original post and I'm still getting nothing.
|
|
|
Post by dv52 (Australia) on May 10, 2022 20:05:52 GMT
hmm......... You will need to explain what you mean by "when using my OBDELEVEN it says "not supported " for the windows remote access". Sounds like you are trying to use a one-click-app, which is very different to my manual coding instructions
Don
|
|
|
Post by j5n1121 on Jul 21, 2022 16:52:28 GMT
Hey there! I legit came across your page/account last night, made an account this morning just because your instructions are so helpful! - I see you were recent about a year ago so I don’t know if you’ll see this. Hope all is well! - is there anyway to code the car to roll up all windows from my window button? Thanks!
|
|