|
Post by prmini on Apr 17, 2019 10:24:18 GMT
Hi all Just purchased a 2018 Passat with active info display from the UK. Speedometer is in MPH. Is it possible to change this to KPH with obdeleven ?
I can change the digital readout in the infotainment settings but not the gauge.
Thanks
|
|
|
Post by gteboy on Jan 17, 2020 18:21:52 GMT
This is something that I am interested in finding out also, has anyone done this or can put an app on the obdeleven for us
|
|
|
Post by stenzel on Jan 11, 2024 21:10:52 GMT
Yes, I did it today.
I am shipping my car abroad so I need the gauge to display KPH.
As I recall, via OBD11 I went in to dashboard 17 , then long coding (make sure the engine is not running) then go to speed select kilometers per hour, verify it with the green tick. you may need to turn the ignition on then off and it will display correctly.
I then changed it back to MPH within the OBD11 as I'm still using it in the UK. I will take photos next time to show the full procedure (as I need to remember for myself) and upload here as the sequence as the information above maybe incorrect.
|
|