|
|
Post by vwjap on Jan 11, 2018 21:40:13 GMT
I did this via VCP, and both were in te same module. Next week I will be able to check with obd11. been done on obdeleven, no problem, |
|
|
|
Post by Hrc on Jan 12, 2018 11:00:07 GMT
Then proper coding on VCDS is needed. I will check door electric module, maybe it is there
|
|
|
|
Post by vwjap on Jan 12, 2018 20:43:37 GMT
Ok user central Electronics
Int. light, 2nd generation: weicher Farbwechsel: not active
soft colour change-not needed
Int. light, 2nd generation: Instrumententafelbeleuchtung mehrfarbig: active
AID colour- needed if you have a AID
Int. light, 2nd generation: Mittelkonsolenbeleuchtung mehrfarbig: active
center console colour- needed If LED’s in C C
Interior light, light configuration: Ambiente_Applikationsleisten_in_Instrumententafel: installed
needed for colour change in MIB
Interior light, light configuration: Mittelkonsolenbeleuchtung: installed
again Center console IF needed
Interior light, light configuration: LIN-Dachkonsole lokal aktivierbar: active
roof consol if needed
Interior light, light configuration: Ambientemenue mit globalem aus: active
gives you a off button in background lighting to switch off door and footwell lighting
Interior light, light configuration: Ambientemenue mit alle Zonen: active
Adds the “background lighting” buttons in settings- needed
Interior light, light configuration: Ambient_Farbliste_HMI: active
gives you the colour slider at bottom of background lighting screen- needed
Interior light, light configuration: Frei_Farbwahl_ueber_HMI: active
Turns off the brightness slider in the background settings screen, so not active if you wanna dim the footwell door lights
You also need to put all 10 colours in Ambientelicht Farbliste
Then reboot mib (press and hold on button) and maybe reset background lighting
There is a full instruction on golf mk7 facelift
|
|
|
|
Post by bungle on Feb 4, 2018 21:03:22 GMT
I did this yesterday and looks soo awesome now!
|
|
|
|
Post by diegothecat on Feb 5, 2018 19:20:06 GMT
Does anyone know what inputs are used for multi colour door and foot well lights on the central Electrics module.
As I'd like to retro fit some instead of just one colour. I have already run all new ultra violet leds throughout the door puddle lights and foot well lights. But I'm thinking that changing the colours with the cash would be much better.
|
|
|
|
Post by vwjap on Feb 6, 2018 11:25:13 GMT
I’m not sure on the Passat but on the golf the LED’s are not swappable so you have to change the door cards to ones that have the multicoloured LED’s in
|
|
|
|
Post by calgarytomaz on Nov 16, 2019 7:51:35 GMT
so, I used the app on my 2018 GSW Highline 4Motion, and now I want to go back to the factory screen. I turned off the app, but the menu did not revert to factory setting. Any tips or codings that I should revert back to?
|
|
|
|
Post by miky87 on Jan 10, 2020 8:16:06 GMT
Hi I tried on my new Polo GTI but in the Adaptation there isn't the voice "Int. Light 2nd generation". It's possible to use another way to do this coding? I've a menu called "Soft Light" with similar voices inside but however i can't change the colour of RGB from Obdeleven. Thank you!!
|
|
|
|
Post by jacksontouran on Feb 18, 2020 9:55:50 GMT
Ok user central Electronics Int. light, 2nd generation: weicher Farbwechsel: not active soft colour change-not needed Int. light, 2nd generation: Instrumententafelbeleuchtung mehrfarbig: active AID colour- needed if you have a AID Int. light, 2nd generation: Mittelkonsolenbeleuchtung mehrfarbig: active center console colour- needed If LED’s in C C Interior light, light configuration: Ambiente_Applikationsleisten_in_Instrumententafel: installed needed for colour change in MIB Interior light, light configuration: Mittelkonsolenbeleuchtung: installed again Center console IF needed Interior light, light configuration: LIN-Dachkonsole lokal aktivierbar: active roof consol if needed Interior light, light configuration: Ambientemenue mit globalem aus: active gives you a off button in background lighting to switch off door and footwell lighting Interior light, light configuration: Ambientemenue mit alle Zonen: active Adds the “background lighting” buttons in settings- needed Interior light, light configuration: Ambient_Farbliste_HMI: active gives you the colour slider at bottom of background lighting screen- needed Interior light, light configuration: Frei_Farbwahl_ueber_HMI: active Turns off the brightness slider in the background settings screen, so not active if you wanna dim the footwell door lights You also need to put all 10 colours in Ambientelicht Farbliste Then reboot mib (press and hold on button) and maybe reset background lighting There is a full instruction on golf mk7 facelift Hi I just follow the step. It works but no dash panel pic showed. imgur.com/gallery/YK3nUS6Please help. Thanks |
|
|
|
Post by vwjap on Feb 18, 2020 10:13:20 GMT
You reset the lights in the car settings? Or hard reset the mmi? (Press and hold on/off button for 10 seconds)
|
|
|
|
Post by jacksontouran on Feb 18, 2020 10:14:20 GMT
Yes, I reset it many times.
|
|
|
|
Post by carwicked on Apr 17, 2020 1:14:25 GMT
Does anyone know if there's a way to make the multicolor ambient lights turn on/off in combination with the leaving home/coming home/welcome lights?
|
|
|
|
Post by busbagarn on May 18, 2020 11:40:27 GMT
So can you make this change if you have "normal" ambient light and not Ambient Plus?
|
|
ndman
New Member
Posts: 1
|
Post by ndman on Sept 4, 2020 22:02:41 GMT
Does anyone know how can I restore to the basic ambient light (not plus) settings (only white). I try to set the multicolor a.l,but this is not possible in my car (2015,discover Pro), becouse I have no a.l plus option. But now I have no ambient light on the front and back doors. Only the footlight working. Sorry my poor English.
|
|
|
|
Post by danimodi on Nov 14, 2020 9:21:50 GMT
Hi
I tried to activate ambient light but i have one messages "function cancelled subsystem does not respond " somebody can help me Thanks
|
|
|
|
Post by rider112 on Jun 3, 2021 15:18:20 GMT
I did this via VCP, and both were in te same module. Next week I will be able to check with obd11. been done on obdeleven, no problem, Hi vwjab, Would you know if "Instrumententafelbeleuchtung mehrfarbig" can be turned on? I am trying to change the ambient lighting to a 2018 passat R line but when I try to change the mentioned command it says - "function not available"; I can see the, command, I can click it and see the options, I can select "active" on the command, but when I press apply it says function unavailable. Sorry in am in someone else's topic and with a different issue but was wondering if there is fix to this. Thanks. Edit: Ok, in the end it did work but it has been quite annoying as it wouldnt let me change the one above, after factory resetting the background lights, it allowed me to have the one above turned on active but then it wouldnt let me change the others down the line so i did a factory reset every step of the way and it did change in the end... Thought id post this in case someone else has these issues; Also the color list menu was in english so I just took a leap and changed all. Took me few hours of head banging thou... |
|
|
|
Post by alek2018 on Sept 11, 2022 19:04:48 GMT
Hi everyone. I make that coding to my passat b8 2017 but when put in a 10 colour all number and push coding see coding complete but athe number not change any ideas?
|
|
|
|
Post by dallah on Oct 2, 2022 13:59:05 GMT
been done on obdeleven, no problem, Hi vwjab, Would you know if "Instrumententafelbeleuchtung mehrfarbig" can be turned on? I am trying to change the ambient lighting to a 2018 passat R line but when I try to change the mentioned command it says - "function not available"; I can see the, command, I can click it and see the options, I can select "active" on the command, but when I press apply it says function unavailable. Sorry in am in someone else's topic and with a different issue but was wondering if there is fix to this. Thanks. Edit: Ok, in the end it did work but it has been quite annoying as it wouldnt let me change the one above, after factory resetting the background lights, it allowed me to have the one above turned on active but then it wouldnt let me change the others down the line so i did a factory reset every step of the way and it did change in the end... Thought id post this in case someone else has these issues; Also the color list menu was in english so I just took a leap and changed all. Took me few hours of head banging thou... Hello rider112, thanks for the information, do you know if this works on ID..4? |
|
