|
|
Post by Carolco on Mar 30, 2019 14:05:45 GMT
 hi. Anyone have this fault in unit 3C? i am trying to retrofit the side assist. Not operative  any idea? thanks group |
|
|
|
Post by vwjap on Mar 30, 2019 14:42:31 GMT
Looks like it’s not been programmed, what’s the long coding
|
|
|
|
Post by ofektal8 on Mar 30, 2019 19:57:55 GMT
I read somewhere that side Assist Needs to be calibrated using a special tool, ask your dealer if they can do that.
|
|
|
|
Post by Carolco on Mar 31, 2019 0:47:44 GMT
I think that is a calibration problem.
obd have in basic settings a tool to calibrate but it is not operational...
|
|
|
|
Post by ofektal8 on Mar 31, 2019 5:52:31 GMT
I think that is a calibration problem. obd have in basic settings a tool to calibrate but it is not operational... It is not something you can do by yourself, You need special calibration equipment. |
|
|
|
Post by Carolco on Apr 27, 2019 12:29:25 GMT
It is possible the programming team can study the possibility of the calibration of some systems like the side assist or the lane assist?
|
|
|
|
Post by Carolco on Apr 27, 2019 12:31:06 GMT
I am talking about the programming team of obdeleven.
And make the possibility of install the TJA like the VCP system can do....
|
|
|
|
Post by ofektal8 on Apr 27, 2019 16:24:53 GMT
It is possible the programming team can study the possibility of the calibration of some systems like the side assist or the lane assist? It can be done with ODIS, you can get one for about 60 bucks. But im pretty sure you need a special plate or something to calibrate it with. |
|
|
|
Post by Carolco on May 30, 2019 12:07:06 GMT
I am retrofitting the Side Assist now. Today is holiday here.
One que#tion important. I must conect the pines 7 and 17 in unit 533 T20. Anyone knows what are the numbers of this pines in the unit?
this is can high and can low .
thanks to all.
|
|
|
|
Post by Carolco on Jun 29, 2019 11:30:59 GMT
Retrofit finally ended with success.
i only miss in the system of blind spot detection any beep of alert. The system vibrate.
|
|
|
|
Post by ofektal8 on Jun 29, 2019 11:34:37 GMT
Retrofit finally ended with success. i only miss in the system of blind spot detection any beep of alert. The system vibrate. Without calibration? |
|
|
|
Post by Carolco on Jun 29, 2019 12:32:28 GMT
Used radars. From eBay. Not calibration needed.
not buy in AliExpress......
|
|
|
|
Post by jurucavw on Dec 16, 2020 12:10:38 GMT
Question: about the wiring:
How to get the wires for mirror glas to the mirror via the door tube ?
Or is the light in the mirrorglas connected to the driver door control unit (42) ?
thx!
|
|
|
|
Post by jurucavw on Feb 11, 2021 19:53:06 GMT
In the meantime i installed the radar sensors from Aliexpress. The models have the letter 'C' at the end. I have communication with module but have the next problem: Still not without errors. Can somebody tell me what i do wrong ?? Thanks in advance     |
|
|
|
Post by jurucavw on Apr 28, 2021 14:42:18 GMT
Still sufer with the not working side assist  In the meantime i have ordered a 'used' set of sensors type 'C' The message 'Data Record Invalid'is now gone  But still not working, i checked all codings again but the basterd still not work Does anybody know why i get 4 fault messages  
 |
|
