Vid here:
traffic_sign_on
1. Controller 5F (Information Control Unit)
Select Adaptations...
Select: Car_Function_List_BAP_Gen2
Select: traffic_sign_recognition_0x21
Adjust Value to activated.
same adaptations list
2. Select: Car_Function_Adaptations_Gen2
Select: menu_menu_display_road_sign_identification
Adjust Value to activated.
3. Select Controller A5 (Front Sensors Driver Assistance System)
Select Long Coding...and switch to byte mode..
Byte 16, Bit 04 Enable - “Traffic sign recognition VZE"
Change from Not Coded to Coded..
4. Select Controller 17 (Dash Board)
Select Long Coding...and switch to byte mode..
Byte 5, Bit 2 Enable - “Traffic Sign Recognition installed".
Change from Not Activated to Activated
5. Select Controller 5F (Information Control Unit)
Select Long Coding...and switch to byte mode..
Byte 24, Bit 6 - untick Traffic Sign Display (VZA) active.
6. Select Controller A5 (Front Sensors Driver Assistance System)
Select Long Coding...and switch to byte mode..
Byte 16, Bit 4 - Traffic Sign Recognition VZE
From Not Coded to Coded...
7. Select Controller A5..
Select Adaptation menu..
Select "Road sign detection fusion mode"..
Change to "Road Sign Detection" mode.
Warnings...