|
|
Post by RS3ER on Aug 8, 2016 11:00:26 GMT
|
|
gwms3
New Member
Posts: 7 
|
Post by gwms3 on Aug 31, 2016 2:34:05 GMT
I have yet to receive my OBDeleven device as of yet. However I was very intrigued by the video you posted as I have a 16 S3. Did some looking around and came up with this, here is how to get pulsing blinkers via VCDS ... Change the GH channels to 20 or so (cooler looking that 100% due to pulsing effect) and change the GH dimming direction to Maximize.
I don't know if this will do you any good. I hope this at least helps a little, and look forward to getting my device in the mail, hopefully very soon.
|
|
gwms3
New Member
Posts: 7
|
Post by gwms3 on Dec 11, 2016 3:22:32 GMT
Here it is. If you have done any of the coding, it can be daunting and there was a lot of trial and error. However I have gotten this to work on my S3. If you need any help, let me know and I will assist as much as I can. [09] Central Electronics Security Access 31347 Adaptation (16)-Leuchte2SL VLB10-Lichtfunktion G 2 Default: Blinken linksaktiv (beide Phasen) (18)-Leuchte2SL VLB10-Dimmwert GH 2 Set to: 100%. (19)-Leuchte2SL VLB10-Dimming Direction GH 2 Set to: Minimize (16)-Leuchte3SL VRB21-Lichtfunktion G 3 Default: Blinken rechts aktiv (beide Phasen) (18)-Leuchte3SL VRB21-Dimmwert GH 3 Set to: 100%. (19)-Leuchte3SL VRB21-Dimming Direction GH 3 Set to: Minimize  20160911_163956 by SamuraiLincolnWRX, on Flickr |
|
gza
New Member
Posts: 6
|
Post by gza on Dec 11, 2016 8:43:00 GMT
Here it is. If you have done any of the coding, it can be daunting and there was a lot of trial and error. However I have gotten this to work on my S3. If you need any help, let me know and I will assist as much as I can. [09] Central Electronics Security Access 31347 Adaptation (16)-Leuchte2SL VLB10-Lichtfunktion G 2 Default: Blinken linksaktiv (beide Phasen) (18)-Leuchte2SL VLB10-Dimmwert GH 2 Set to: 100%. (19)-Leuchte2SL VLB10-Dimming Direction GH 2 Set to: Minimize (16)-Leuchte3SL VRB21-Lichtfunktion G 3 Default: Blinken rechts aktiv (beide Phasen) (18)-Leuchte3SL VRB21-Dimmwert GH 3 Set to: 100%. (19)-Leuchte3SL VRB21-Dimming Direction GH 3 Set to: Minimize 20160911_163956 by SamuraiLincolnWRX, on Flickr Thanks for this. Tried your instructions as per above but no luck  |
|
gwms3
New Member
Posts: 7
|
Post by gwms3 on Dec 11, 2016 16:50:49 GMT
 Well poo ... Let me get back in there and take some screen shots of my settings. It was a bit of a pain, I'll get back to ya shortly. Here is a link to some screenshots of my settings. Let me know if this works for you. goo.gl/photos/bSjKpJqoUaAmz7SM7
|
|
gza
New Member
Posts: 6
|
Post by gza on Dec 11, 2016 22:59:21 GMT
Thanks. I will try again tonight when I get home.
Are the screenshots of all teh screens you needed to make changes in?
|
|
gwms3
New Member
Posts: 7
|
Post by gwms3 on Dec 12, 2016 1:19:01 GMT
Thanks. I will try again tonight when I get home. Are the screenshots of all teh screens you needed to make changes in? I believe so, yes. The two smaller screenshots are the settings currently. The larger list is much of my trial and error to get it to work. |
|
gza
New Member
Posts: 6
|
Post by gza on Dec 12, 2016 1:21:56 GMT
Thanks, I'll have a go at replicating the two smaller screenshots to see if I get this going.
Do you know if there is a simple way to set these back to default or is the only back-out option to manually reverse each change?
|
|
gwms3
New Member
Posts: 7
|
Post by gwms3 on Dec 12, 2016 2:22:09 GMT
Thanks, I'll have a go at replicating the two smaller screenshots to see if I get this going. Do you know if there is a simple way to set these back to default or is the only back-out option to manually reverse each change? I took screen shots before messing with things. Then reverted back when I had problems. |
|
gza
New Member
Posts: 6
|
Post by gza on Dec 12, 2016 2:38:28 GMT
Cheers - will have a go and revert if necessary.
|
|
gza
New Member
Posts: 6
|
Post by gza on Dec 12, 2016 9:22:25 GMT
Well poo ... Let me get back in there and take some screen shots of my settings. It was a bit of a pain, I'll get back to ya shortly. Here is a link to some screenshots of my settings. Let me know if this works for you. goo.gl/photos/bSjKpJqoUaAmz7SM7 Pulsing indicators all working perfectly now - thanks very much for the share and the useful screenshots 👍🏼 |
|
gwms3
New Member
Posts: 7
|
Post by gwms3 on Dec 13, 2016 0:40:20 GMT
Well poo ... Let me get back in there and take some screen shots of my settings. It was a bit of a pain, I'll get back to ya shortly. Here is a link to some screenshots of my settings. Let me know if this works for you. goo.gl/photos/bSjKpJqoUaAmz7SM7 Pulsing indicators all working perfectly now - thanks very much for the share and the useful screenshots 👍🏼 Awesome, glad to hear. Sorry again about the mix up. The "wink" is something that bothers me, probably more than is should. Haha. Very glad I could help ya. Now I need to get the front ambers turned off. |
|
|
|
Post by Guest on Mar 22, 2017 22:06:15 GMT
Anyone have step by step instructions please
|
|
Well poo ... Let me get back in there and take some screen shots of my settings. It was a bit of a pain, I'll get back to ya shortly.