|
|
Post by sim1212 on Mar 4, 2019 3:32:00 GMT
Hi everyone! I would like to have some help with throttle body adaptation. I am new to coding and would really like if someone can give me some help with it. Thanks a lot!
|
|
|
|
Post by adiwob on Mar 4, 2019 7:16:25 GMT
Hello, first post your diesel/petrol, year, engine code so we can help you.
|
|
|
|
Post by sim1212 on Mar 4, 2019 15:21:31 GMT
Yeah sorry for that! The car is a VW Passat 2008 petrol 2.0t FSI BPY engine code. From Canada, QC.
|
|
|
|
Post by adiwob on Mar 5, 2019 7:20:48 GMT
Hello again sim1212, this should be for your car, basic setting group 60: Throttle Body Alignment B060,1,Throttle Valve,Sensor 1 (G187),Range: 0.0...100.0 %\nSpecification: 3.0...93.0 %\nSpecification (Idle): XX.0...XX.0 % B060,2,Throttle Valve,Sensor 2 (G188),Range: 0.0...100.0 %\nSpecification: 97.0...3.0 %\nSpecification (Idle): XX.0...XX.0 % B060,3,Throttle Adaptation,Steps Counter,Range: 0...8\nSpecification: 8 B060,4,Throttle Body,Alignment Status,Range: ADP RUN/ADP OK/ADP ERROR\nSpecification: ADP OK Prerequisites: Ignition ON & Engine OFF The Throttle Body Alignment is completed when Field 4 shows "ADP OK". |
|
|
|
Post by sim1212 on Mar 5, 2019 12:37:29 GMT
Thanks a lot very appreciated!
|
|
|
|
Post by ivan411 on Mar 11, 2019 18:00:11 GMT
Same for B7 2013 2.0 TDI?
|
|
|
|
Post by adiwob on Mar 12, 2019 7:15:02 GMT
No ivan411, it's not the same you should have a drop-down menu from where you can choose. First you must do Long adaptation and reset the throttle and after that you must do the basic settings. |
|
|
|
Post by dstrawsb on Aug 21, 2020 20:28:03 GMT
Is the process same on a 2013 GLI. I have a new TB, can't find Throttle Body Adaption anywhere.
|
|
hoyer
New Member
Posts: 2
|
Post by hoyer on May 13, 2023 13:07:59 GMT
No ivan411, it's not the same you should have a drop-down menu from where you can choose. First you must do Long adaptation and reset the throttle and after that you must do the basic settings. How do I reset the trottle settings? |
|
hoyer
New Member
Posts: 2
|
Post by hoyer on Jun 22, 2023 15:15:19 GMT
I have the 2.0 TDI CBBB 170PS.
The problem is if I open ENGINE -> basic settings-> 60 it shows no values and „off“.
Same for 98 and there is no drop-down menu to select „throttle body alignment“
What am I doing wrong?
Before I cleaned the failure logs and restarted the car without a running motor.
The new throttle body installed gives me the error P2102 „signal too small“.
Please help!
|
|
|
|
Post by ageorge05 on Apr 10, 2024 19:57:26 GMT
I'm trying to do one on my 2001 B5 A4 1.8T AWM engine code. Would you happen to know the procedure for that? I tried looking through the app and can't find anything.
|
|
