dante
New Member
Posts: 2
|
Post by dante on Feb 28, 2019 2:01:06 GMT
Hey there. I just swapped in an MK6 cluster to my MK5.
Car functions, cluster functions, but OBDEleven can't connect to the cluster control module.
Is it because I'm using an MK6 feature and OBDEleven is looking for an MK5 module, or?
|
|
|
Post by adiwob on Feb 28, 2019 7:08:04 GMT
Hello, did you also change the 19 - Gateway module with a new one that knows UDS protocol?
|
|
dante
New Member
Posts: 2
|
Post by dante on Feb 28, 2019 14:16:02 GMT
I did not. is there a list of compatible gateways that work with mk5?
|
|
|
Post by adiwob on Feb 28, 2019 15:31:21 GMT
You can put any mk6 gateway, you can search for one from 2009-2010. Firt make screenshots of every byte and bit on your old gateaway and after this install the new one and check every bit that you have on the old one. Don't copy paste old coding to new gateway will not work!!!! Good luck .
|
|