|
|
Post by markom on Feb 2, 2019 22:32:55 GMT
Help needed!!
I cant adapt my keys. I have managed to clear memory. Channel 21 wont let me set new value
|
|
bulletproof
New Member
FEAR NOT, YOU ARE NOT ALONE WE ARE WATCHING OUT FOR YOU.
Posts: 4
|
Post by bulletproof on Feb 4, 2019 0:41:50 GMT
Markom this method should work...
In the comfort module(46), adaptations, in channel 00, I reset all the remote fobs by pressing and holding the green check mark
1a. In the comfort module(46), adaptations, in channel 01, enter 1 into the new value field and press the green check mark (do not press and hold)
1b. Press the unlock button on the first remote
2a. In the comfort module(46), adaptations, in channel 01, enter 1 into the new value field and press the green check mark (do not press and hold)
2b. Press the unlock button on the second remote
3a. In the comfort module(46), adaptations, in channel 01, enter 1 into the new value field and press the green check mark (do not press and hold)
3b. Press the unlock button on the thrid remote
|
|
|
|
Post by zimmen on Oct 13, 2019 11:31:01 GMT
This don't work for me
|
|
|
|
Post by nerdsb7 on Aug 30, 2020 21:56:18 GMT
Markom this method should work... In the comfort module(46), adaptations, in channel 00, I reset all the remote fobs by pressing and holding the green check mark 1a. In the comfort module(46), adaptations, in channel 01, enter 1 into the new value field and press the green check mark (do not press and hold) 1b. Press the unlock button on the first remote 2a. In the comfort module(46), adaptations, in channel 01, enter 1 into the new value field and press the green check mark (do not press and hold) 2b. Press the unlock button on the second remote 3a. In the comfort module(46), adaptations, in channel 01, enter 1 into the new value field and press the green check mark (do not press and hold) 3b. Press the unlock button on the thrid remote He’s right But Go to control 46 The go to adaption Press channel 00 Then swipe or hold the green button That’ll clear it Next go to channel 21 First field is 0 Make it 1 Press test Then hold the lock button While holding the lock button Swipe write/ press write button Take key out of ignition key It’ll work then Also Make sure you have a new battet |
|
|
|
Post by shipflight on Sept 1, 2020 19:50:36 GMT
Hi!
Attempted your solution myself. But when I am in channel 00, I get the "(00) Function unavailable".
I have the OBD pro edition.
Do you have any suggestions?
Im able to test adaption with success
I can also perform adaptation in other channels, and coding.
|
|
