|
Post by gustins on Aug 4, 2016 19:05:43 GMT
Hello guys,i did have obd pro (very big thanks to developers for making so good and easy useb device) 👍👍 So and was reading my car and did get to error codes, 2454,2453 🤔🤔wich are according to manufacture,disel particulate filter diferential pressure sencore. so i did brought a new one and now i need to fit it, but before that i need to calibrat it, so my egr knows it's a new one So i need some help, on to do the adaption of the differential pressure sensor for the particulate filter. Is anybody knows or can gide me tru the process i would be really nice. Thanks in advance.Have a nice day everybody.
|
|
|
Post by OBDeleven on Aug 5, 2016 13:13:23 GMT
Hi, some data about your car will be useful ![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
|
|
|
Post by gustins on Aug 5, 2016 13:29:55 GMT
Hi, some data about your car will be useful ![:)](//storage.proboards.com/forum/images/smiley/smiley.png) Audi a4, 2011 year, 2.0tdi, if need anything else let me know. Cheers Admin.
|
|
|
Post by gustins on Aug 5, 2016 13:33:51 GMT
![](http://thumb.ibb.co/mkoaaa/image.jpg) wo
|
|
|
Post by gustins on Aug 5, 2016 13:43:53 GMT
|
|
|
Post by OBDeleven on Aug 5, 2016 13:45:04 GMT
Please make screenshot of engine info screen.
|
|
|
Post by gustins on Aug 5, 2016 13:52:10 GMT
I will gone do later today, when iget back home.
|
|
|
Post by gustins on Aug 5, 2016 18:08:04 GMT
|
|
|
Post by OBDeleven on Aug 6, 2016 9:15:41 GMT
UDS Protocol (G450) procedure Key ON, Engine OFF Basic Setting Select Adaptation of diff. pressure sensor particulate filter activate the Basic Setting.
Select Resetting of learned values of difference pressure sensor activate the Basic Setting.
|
|
|
Post by gustins on Aug 6, 2016 11:58:24 GMT
Thanks admin, will gone try to do later on Thanks a lot 👌👌👌👌👌
|
|
|
Post by gustins on Aug 8, 2016 9:16:56 GMT
Is there any chance i can do force diesel particular filter regeneration,?? Thanks in advance
|
|
|
Post by Johncv on May 27, 2017 21:27:44 GMT
Sorry if this is an old post, but I am getting ready to swap this sensor and need some assistance.
When I select basic settings I am prompted to select a channel. What channel is the senor differential settings?
|
|
|
Post by gustins on Jun 11, 2017 7:18:54 GMT
UDS Protocol (G450) procedure Key ON, Engine OFF Basic Setting Select Adaptation of diff. pressure sensor particulate filter activate the Basic Setting.
Select Resetting of learned values of difference pressure sensor activate the Basic Setting.
|
|
|
Post by andy1964 on Jul 16, 2017 10:11:57 GMT
Hi Guys. Followed the details given but on the basic settings i am told Not Available. Is there something i need to do to activate the setting?
|
|
|
Post by TonyCH on Aug 30, 2017 7:12:19 GMT
Hi, I too have an A4 2011 2.0Tdi.
About the instructions above: 1. UDS Protocol (G450) procedure - no idea what that means? 2. OBDEleven Pro does not even connect when Key ON, Engine OFF. Engine must be running before it connects. I can then turn the engine off then and the connection stays on. 3. Basic Setting, Select Adaptation of diff. pressure sensor particulate filter, activate the Basic Setting. - This goes through ok 4. Then I must unconnect, key off, key on, engine on, obd eleven connect, engine off and only then I can Select Resetting of learned values of difference pressure sensor, activate the Basic Setting. This gave me an ok too.
Don't know yet if I was successfull. I think I've done this in a few different ways 10 times now and always the same error (P2453) comes back after 30-50 km. New sensor, all fuses are good, wiring and tubings seems good. Live data shows the sensor is alive as pressure is not static. Just seems like I cannot success with the adaptation.
Engine: CAHA 125 kW (170 HP) 2 l System description: R4 2.0l TDI Software number: 03L906022NP Software version: 9978 Hardware number: 03L906019AL Hardware version: H32 ODX name: EV_ECM20TDI03L906022NP ODX version: A02012 Long coding: 0A194012243403080000
|
|
|
Post by robba86 on Aug 30, 2017 18:29:01 GMT
Hello I cant activate basic settings, its active for half a second and then switches to Basic settings ended and then the glow plug light starts to flash...? ![](http://thumb.ibb.co/kSFNmk/Screenshot_20170830_174244.png) ![](http://thumb.ibb.co/jzrL6k/Screenshot_20170830_204148.png)
|
|
|
Post by One-Click apps developer on Aug 31, 2017 8:51:57 GMT
Hello,
if you getting message not available and basic settings ending it means you already activated it and basic settings closing automatically.
|
|
|
Post by robba86 on Aug 31, 2017 9:20:48 GMT
can I see this value somewhere to confirm its been reset?
|
|
|
Post by TonyCH on Sept 3, 2017 14:18:43 GMT
Nope, the code came back after some driving. Any ideas?
|
|
|
Post by TonyCH on Sept 3, 2017 14:21:38 GMT
Sorry, didn't see there was replys. So, my post above was replying to my previous post, not to you robba.
|
|
|
Post by SJL on Jan 27, 2018 10:35:55 GMT
Hi,
I came across this thread and thought it was just what I was looking for but have hit problems!!
Maybe its just me but when I press basic settings I get asked for a channel number and never get presented with any drop down list to select from. When I choose a channel I get 4 value options if I am lucky but more often than not I get not available.
All the tutorials I have seen give a list of drop down values in basic settings.
Any ideas where I am going wrong??
Thanks
Stuart
|
|
|
Post by danidasanic on Dec 5, 2020 1:33:32 GMT
Hey guys!
Anyone knows how to reset the differential pressure sensor on a CXXB engine using the obdeleven ?
Its a 1.6 Tdi from 2016 , EA288 gen
|
|
ashok
New Member
Posts: 5
|
Post by ashok on Aug 2, 2022 7:05:21 GMT
hi. i have vw golf 6 variant 2010-2011 with CFHC 2.0 tdi engine and my dpf pressure sensor part number is "059 906 051 C"
RECENTLY i got error P245200 dpf pressure sensor "A: circuit and i replaced with exact part with same number and i was trying to do the adaptation in obdeleven with uds protocol but nothings happenng except glow plug light is flashing and the basic setting says that adapation ended as soon as i click the start button and after 3 or 4 min the obdeleven dissonnects and the dpf oil ash volume is at zero now before was something like 0.9l
can anone please help me how they did it with obdeleven or vcds is needed here
|
|