Enabling Passat B7 Backup Camera

Hi,

I have a 2012 VW Passat US version that I am planning on installing a backup camera in.  The last step is to enable the backup camera functionality.  I have a RNS-510 radio\navigation.  This process is well documented for a Vagcom but I don't see any specific instructions on doing this using an OBDEleven.

I guess first question is there an app to do this.  Currently there does not a appear to be one.  Below is the steps for Vagcom and my translations for OBDEleven.  Would appreciate if my steps for ODBEleven can be confirmed as correct.

For Vagcom.

Select Module 37-Navigation
Select Coding -07
Select Long Coding Helper
Select Byte 03 (4th one)
Set Bit 6 (Check it) Back up Camera Installed\Activated
Select Exit
Select Do It
Done

For OBDEleven

Go to Modules
Select Module Navigation
Select Coding
Select Byte 03 (4th one)
Set Bit 6 (Check it)
Select Green Check
Done

Just want to make sure.

Thanks,

Techneighbor