|
Post by MGRobbie on Jan 16, 2019 6:38:27 GMT
Searching on the internet I find a lot of explanation which are related to Ross-Tech. Many times it is mentioned to go in menu coding and then "LONG CODING HELPER". Where should I be able to find this menu in OBDEleven. I would like to extend the intermittence of the wiper since it is far to frequent in max delay mode (tumble left side)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 16, 2019 9:13:34 GMT
My understanding is that for long coding VCDS Has the Long Coding helper which puts labels against each bit in each byte where they know what it is used for. On OBD11 You select Long Coding and then when you select the correct Byte the bits are all displayed for you.
As you can see in the below example (from my car so may not be the same as yours) Bit 0 and Bit 1 have no description because nobody has yet found out what they do. All the other Bits have a description.
Please note these descriptions are maintained by the User Community.
|
|