|
Post by radish on Jan 10, 2019 10:04:19 GMT
Hi, i hope that this is the right section. I own a seat ibiza kj and this morning i started play with obd. After some backups i activeted the coming leaving home and the staging on dashboard. After that i started a scan to check that everything was ok but it found 2 faulty units. The first was on engine and the second on light (this was already "red", the little circle on the unit's number). I really didn't know what to do and adviced from the app i reseted the error. The next scan was succesfull. Now i don't know if i just delete the singal of the error or what, i'm scaried about that i just hid errors. What you advice me to do? Should i just restore from backup and make change again? Or just ignore it?
Thank you
|
|
|
Post by sgt1297 on Jan 12, 2019 11:36:36 GMT
radish, you have nothing to loose by resetting the faults. Some are intermittent and may never re-appear. Others are more persistent and keep showing up again, pointing to a full time fault. Reset all the faults and re-scan after running the car. It is better to run the scan after using the car as this will allow those faults that only appear when the vehicle has been run to be logged. If the same fault shows up, further investigation is required. If it doesn't show up it may be an intermittent fault. Hope this helps
|
|