|
|
Post by chris1892 on Dec 26, 2018 20:32:59 GMT
Hello I want to deactivate Start Stop in my Touran 2011.
I know the access to Stg 19 but I cant find the point adaption only long adaption and there I have to choose a chanal which I dont know.
I hope somebody can help me.
Best regards
|
|
|
|
Post by klongottes2007 on Jan 13, 2019 17:43:22 GMT
Hallo
in the CAN bus control unit start stop voltage change from 7V to 12V
I,m from Germany my english is not so good
|
|
|
|
Post by lecsek on Jan 9, 2020 5:59:21 GMT
19 – CAN Gateway]
[Adaptation - 10]
Modify maximum temperature and minimum temperature from -50 to 50 degrees
Or Try (i use this, 2012 Touran):
Gateway -> adaptation -> channel 13 -> 002000 to 292029 (change ASCII to HEX!! in obd11)
or try
[01 ENGINE] -> [Coding - 07] -> [Long Coding Helper] -> Byte 6
Bit 0 untick
[01 ENGINE] -> [Adaptation 10] ->
Channel Activation of Start/Stop function, change stored value to Not Active
[02 AUTO TRANS] -> [Adaptation 10] ->
Channel Deactivation of Start/Stop Function, change from Not Active to Active
[46 Central Conv] -> [Coding - 07] -> [Long Coding Helper] -> Byte 11
Bit 2 untick
In addition, disable switch in the center console:
[09 – Cent. Elect.] ->[Coding -> 07] -> Byte 20
Bit 2 set to 0
|
|
