|
Post by pnwbrdr on Dec 21, 2018 5:20:07 GMT
I've been using obdeleven now for a few months and it's been great. Just been lurking in here, taking little bits and pieces as I find them, not really ambitious enough to make unconfirmed tweaks... Lately I noticed that the format of the long coding off the 09 central electrics on my mk7R is off. I don't go in there often, but when I'm poking around the format is a lot less user friendly. See image below. Is this what everyone is seeing? Do I need to delete and reinstall the app or something? Conversely, here is what I see when I look in my HVAC module long coding... Pretty sure this is what 09 Central electrics used to look like...
|
|
|
Post by vwjap on Dec 21, 2018 8:10:36 GMT
The long coding in central electronics has been not used for a while now, so set to 00
|
|
|
Post by pnwbrdr on Dec 21, 2018 16:14:13 GMT
The long coding in central electronics has been not used for a while now, so set to 00 Not sure what you mean... Just that the modifications are all done in adaptations, not long coding, so they changed the display format? I guess that's fine, just seemed odd to go backwards in terms of an easy to navigate interface.
|
|
|
Post by ofektal8 on Dec 21, 2018 16:22:51 GMT
The long coding in central electronics has been not used for a while now, so set to 00 Not sure what you mean... Just that the modifications are all done in adaptations, not long coding, so they changed the display format? I guess that's fine, just seemed odd to go backwards in terms of an easy to navigate interface. There are 2 view modes, Press the 01 on the top right, It will change between those modes.
|
|
|
Post by pnwbrdr on Dec 21, 2018 18:57:46 GMT
Not sure what you mean... Just that the modifications are all done in adaptations, not long coding, so they changed the display format? I guess that's fine, just seemed odd to go backwards in terms of an easy to navigate interface. There are 2 view modes, Press the 01 on the top right, It will change between those modes. Tried that. Does not change anything, I just get a red alert message that tells me to press and hold on an item to make changes.
|
|