Post by karlp on Dec 19, 2018 4:51:54 GMT
The MY12.5 refresh of the 6R Polo came with a "Bluetooth Touch Adapter" even for the models like the GTI that allready had bluetooth built-in. The touch adapter base is Bury system so you can replace it with phone specific adapaters but this needs recoding. All the information about this common problem is detailed here www.vwwatercooled.com.au/forums/f128/all-your-my12-5-bluetooth-touch-adaptor-answers-79639.html
The long codes are provided here: www.vwwatercooled.com.au/forums/f153/vcds-6r-polo-primarily-gti-60641-2.html#post808755
I have had this procedure done on my car by an auto-electrician a long time ago but I don't use MDI and i want A2DP Bluetooth re-enabled so i can play music from my phone via bluetooth again.
the post above gives code to disable A2DP option but not re-enable. It'd be great if someone could help me work out how to re-enable A2DP Bluetooth audio via OBDEleven. It'd be even better if there was an option to toggle both of these options, many people replace the touch adapter with other bury units to suit their phones.
thanks in advance,
The long codes are provided here: www.vwwatercooled.com.au/forums/f153/vcds-6r-polo-primarily-gti-60641-2.html#post808755
If you want to take the Touchscreen Unit out of the Cradle but can't because the it shuts down the bluetooth. Or if your iPhone is cutting out playback on the MDI when the bluetooth connects, try these.
*You only need to do VCDS coding if you want nothing in the cradle or using a non-VW branded Bury cradle*
ie. If you get another VW-Branded phone specific cradle, you do not need to do any coding. But if you get a cradle from Bury (who make the cradle system), you will need to code it.
To deactivate the touchscreen warning, first make sure your phones BT is off. It'll reject the coding if its connected to something.
Load up VCDS -> Select Control module -> 77 - Telephone
In Telephone go select coding and enter...
0200000000000010
To deactivate A2DP (which stops the iPhone cutting out on MDI) and touchscreen warning enter this code instead.
0200000001000010
*You only need to do VCDS coding if you want nothing in the cradle or using a non-VW branded Bury cradle*
ie. If you get another VW-Branded phone specific cradle, you do not need to do any coding. But if you get a cradle from Bury (who make the cradle system), you will need to code it.
To deactivate the touchscreen warning, first make sure your phones BT is off. It'll reject the coding if its connected to something.
Load up VCDS -> Select Control module -> 77 - Telephone
In Telephone go select coding and enter...
0200000000000010
To deactivate A2DP (which stops the iPhone cutting out on MDI) and touchscreen warning enter this code instead.
0200000001000010
I have had this procedure done on my car by an auto-electrician a long time ago but I don't use MDI and i want A2DP Bluetooth re-enabled so i can play music from my phone via bluetooth again.
the post above gives code to disable A2DP option but not re-enable. It'd be great if someone could help me work out how to re-enable A2DP Bluetooth audio via OBDEleven. It'd be even better if there was an option to toggle both of these options, many people replace the touch adapter with other bury units to suit their phones.
thanks in advance,