|
|
Post by pissat4motion on Dec 17, 2018 2:36:49 GMT
Might perform this retrofit in the future. Been reading up on it.
My cars ECU has an immo delete. Assuming I wouldn't need to recode the transponders/keys, I should be able to perform the necessary coding with obd11 correct?
|
|
|
|
Post by Matthew on Dec 24, 2018 15:00:36 GMT
You won't get any of the COMFORT menu options in this cluster as they are 2 different protocols ( such as BAP vs. The one that your red display uses).
|
|
|
|
Post by pissat4motion on Jan 4, 2019 0:37:22 GMT
You won't get any of the COMFORT menu options in this cluster as they are 2 different protocols ( such as BAP vs. The one that your red display uses). I've updated a couple modules tho. Can gateway, swcm from mk6 (for my mfsw retrofit). Would that make a difference? I'll be coding the steering wheel using Lin 2.0 settings.. and that supposedly would allow for BAP. As you see it would any menu items work? |
|
|
|
Post by Matthew on Jan 4, 2019 16:37:51 GMT
I don't know how to answer that question at the moment. I think it also requires replacing the Gateway #19 and the Body Control Module #09 to MK6 ones to get the comfort options to appear.
I want to try this retrofit, but I'm trying to figure out how I'd get the immobilizer portion to work first.
|
|
