|
Post by havsgaard on Dec 10, 2018 12:18:24 GMT
Hi
I have tried to use the "Basic setting of transmission" functionality in (02) - Transmission - basic settings. Oil/Engine temperature is 60+ degress DSG is in PARK Foot on brake ignition on, engine off
At the beggining I hear a lot of mechanical noise from the gearbox - as expected - however after a minute, the active status changes to "Cancelled due to detected malfunction" - what does this mean or what could be the reason to it?
The above was, without luck, being performed on a T-ROC 1.5 DSG (DQ200 - 7 speed dry)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2018 23:03:30 GMT
I don't know your car but based on what i have seen on the web I would make the following suggestions.
1/ There must be no fault codes on the DSG, I suspect if there are you need to clear them first.
2/ On the brakes you need both parking and foot brake on
|
|
|
Post by havsgaard on Dec 11, 2018 7:10:11 GMT
There are no errors registered, those was cleared prior, and parking + brake was also on.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 11, 2018 11:09:23 GMT
Then the only other thing I can suggest is that you do a OBD11 Android data clear and also Bluetooth clear on your phone.
This sometimes helps with strange errors, also make sure you do have strong internet connection as that can cause issues.
Sorry I cant offer any other help
|
|
|
Post by havsgaard on Feb 11, 2019 18:14:03 GMT
Just to follow up on this, clear data, cache and Bluetooth didn't help - still ended with same error.
|
|
|
Post by Marius89 on Apr 10, 2020 18:51:09 GMT
I don't know your car but based on what i have seen on the web I would make the following suggestions. 1/ There must be no fault codes on the DSG, I suspect if there are you need to clear them first. 2/ On the brakes you need both parking and foot brake on The engine must be on, not off
|
|