|
Post by st3vmo7r on Dec 9, 2018 12:34:15 GMT
Hello Guys,
Is there any possibility to change the kW value in the Performance Monitor ? I'm running a Stage 1 on my Golf 7 R, but the value is limited to 220 kW. So I would love to change that value.
|
|
|
Post by Roman77 on Nov 14, 2019 19:48:26 GMT
Pretty old topic I'm aware but does anyone happen to know this?
|
|
|
Post by dv52 (Australia) on Nov 14, 2019 22:06:26 GMT
^^^ Roman: Of course anything is possible, but I seriously suspect that the capabilities of the Performance monitor application is hard-coded in the firmware for the hex 5F module. Without understanding the programming code - I doubt that this aspect can be changed. And even if the correct code was found - OBD11 can't be used to alter module firmware.
Don
|
|
|
Post by newty on Nov 15, 2019 15:32:07 GMT
We had a similar question in the closed vcp-system forum henno replied, that the power gauge, including actual power and maximum power is controlled by the engine ECU (01) - and told that this is quite deep in the firmware and not to be coded.
|
|
|
Post by Roman77 on Nov 15, 2019 18:50:07 GMT
Okay thanks for clarifying.
|
|