Post by johnnyb6 on Dec 8, 2018 5:52:34 GMT
I replaced my driverside door with a used door from another passat.
When I plugged everything in my door locks, but my windows,trunk release, ajustable heated mirrors & Alarm doesn't work.
I beleive the window motor module is shot so I took the window motor out of my original door and put it in the new door. Now my windows work but my doors don't lock and the red indicator light for the alarm stays solid red when I try to lock the door it blinks maybe 6 times AND thats it.
Do I have to change the code from my original door module to the new door module code?
I'm so confused!!!
If I change the code to the window motor module will everything work like it suppose to?
Thanks inadvance![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
Car: Volkswagen Passat
Year: 2007
Body type: Saloon
Engine: BPY 147 kW (200 HP) 2.0 l
Mileage: 296570 KM
42 Door Electronics Driver Side
System description: J386 TUER-SG FT
Software number: 1K0959701Q
Software version: 1131
Hardware number: 1K0959793M
Hardware version: 222
Serial number: 00000016769219
Coding: 0001463
Trouble codes:
00932 - Motor for window lift, driver side no or incorrect basic setting/adaptation
Intermittent
01552 - Driver door central locking LOCK motor Electrical malfunction in circuit
Intermittent
00928 - Lock unit for central locking Driver side Implausible signal
static
01030 - Central locking key button Driver side, lock Implausible signal
static
01330 - Comfort system central control module No signal/communication
Intermittent
01734 - Mirror adjustment position sensor, horizontal, driver side Implausible signal
static
01736 - Mirror adjustment position sensor, vertical, driver side Implausible signal
static
When I plugged everything in my door locks, but my windows,trunk release, ajustable heated mirrors & Alarm doesn't work.
I beleive the window motor module is shot so I took the window motor out of my original door and put it in the new door. Now my windows work but my doors don't lock and the red indicator light for the alarm stays solid red when I try to lock the door it blinks maybe 6 times AND thats it.
Do I have to change the code from my original door module to the new door module code?
I'm so confused!!!
If I change the code to the window motor module will everything work like it suppose to?
Thanks inadvance
![:)](http://storage.proboards.com/forum/images/smiley/smiley.png)
Car: Volkswagen Passat
Year: 2007
Body type: Saloon
Engine: BPY 147 kW (200 HP) 2.0 l
Mileage: 296570 KM
42 Door Electronics Driver Side
System description: J386 TUER-SG FT
Software number: 1K0959701Q
Software version: 1131
Hardware number: 1K0959793M
Hardware version: 222
Serial number: 00000016769219
Coding: 0001463
Trouble codes:
00932 - Motor for window lift, driver side no or incorrect basic setting/adaptation
Intermittent
01552 - Driver door central locking LOCK motor Electrical malfunction in circuit
Intermittent
00928 - Lock unit for central locking Driver side Implausible signal
static
01030 - Central locking key button Driver side, lock Implausible signal
static
01330 - Comfort system central control module No signal/communication
Intermittent
01734 - Mirror adjustment position sensor, horizontal, driver side Implausible signal
static
01736 - Mirror adjustment position sensor, vertical, driver side Implausible signal
static