r33
New Member
Posts: 3
|
Post by r33 on Dec 6, 2018 12:25:20 GMT
Hi, first post on here so go easy on me  Is there any way to code the rear spoiler to stay up all the time and just go up and down on the dash button when you press it? Every time I get in the car it’s the first thing I press and it would be nice not to have to. I haven’t fired up the obdEleven yet but I’m looking forward to getting into it tonight! Thanks in advance. |
|
|
|
Post by to10oms on Dec 27, 2018 11:31:19 GMT
From mobilejo on another forum if you can find the correct module, I've not tried it.
Rear spoiler deactivation - I have left mine activated as standard but I wanted to adjust the activation/deactivation speeds which I cannot find a solution to. However while experimenting I found that it looks like it is possible to deactivate it completely with no error lights on the dash. I tested it on my road and no errors appear, but as I have left mine as standard I don't know what will happen once the key speeds are hit. I would assume nothing, but try at your own risk obviously.
If deactivated whilst in the up position, it stays up. If deactivated whilst down, it stays down.
To do it, simply untick the box that says "rear spoiler installed" in the long coding helper in both module 17-instruments (byte 5 bit 1) and also in module 46-central conv. (byte 6 bit 7)
|
|
|
|
Post by djbubbbbbz on Jan 12, 2019 13:14:29 GMT
Hi anybody know how to alter the activation speed for the spoiler?
|
|
|
|
Post by to10oms on Jan 16, 2019 14:40:36 GMT
From what I've read you can't change the speed.
|
|
|
|
Post by joe1901 on Sept 27, 2019 9:40:50 GMT
Unplug module In the trunk
|
|
r33
New Member
Posts: 3
|
Post by r33 on Mar 14, 2020 20:34:44 GMT
From mobilejo on another forum if you can find the correct module, I've not tried it. Rear spoiler deactivation - I have left mine activated as standard but I wanted to adjust the activation/deactivation speeds which I cannot find a solution to. However while experimenting I found that it looks like it is possible to deactivate it completely with no error lights on the dash. I tested it on my road and no errors appear, but as I have left mine as standard I don't know what will happen once the key speeds are hit. I would assume nothing, but try at your own risk obviously. If deactivated whilst in the up position, it stays up. If deactivated whilst down, it stays down. To do it, simply untick the box that says "rear spoiler installed" in the long coding helper in both module 17-instruments (byte 5 bit 1) and also in module 46-central conv. (byte 6 bit 7) Finally got round to doing this in my now RS7 and it worked perfectly, thank you. |
|
aleks
New Member
Posts: 1
|
Post by aleks on Mar 26, 2020 18:48:06 GMT
It will be cool if someone can find the right code that spoiler going up with 20-30 km/h. Maybe we can order it from OBD tech support?
|
|
