|
Post by ronald1992 on Dec 1, 2018 14:52:01 GMT
Hello, I have a quick question about the app to activate door warming lights. I drive a 2011 golf 1.2 tsi (5 door) and ad the moment I have reflectors in my doors. I want to install aftermarket led door warninglights, zo I look for the app and I get warming that it is not supported.
Do I get the warming because no light is installed and therfore the app coding Will not have effect, or does my boardconputer not support door warninglights ?
Thanks for helping !
|
|
|
Post by adiwob on Dec 3, 2018 7:12:40 GMT
Hello, I did activate this on my 2010 passat b6. You have to go to each door to activate this, for exemple [42 - Door electronics driver side]-[Long Coding]-[Byte 2] then check Bit 6. For rear door you have to select subsystems on driver and passager door. Good luck !
|
|
|
Post by ronald1992 on Dec 12, 2018 6:46:22 GMT
oke, so if the one click app says it is not supported its not 100% that it will not work?
i want to know before i spend a day retrofit the lights only to discover they will never work because my OBC system does not support it
|
|
|
Post by adiwob on Dec 12, 2018 7:40:55 GMT
From my knowledge every golf from 2005 with electrical windows have this function. The only thing you have to code it manually. Go to driver door module then long coding or coding and post a screenshot so i can help you.
|
|
|
Post by ronald1992 on Dec 12, 2018 7:47:29 GMT
thx, than ill give it a try
|
|