db
New Member
Posts: 3
|
Post by db on Nov 28, 2018 21:45:30 GMT
Just installed RCD330 and all is good, but about to install the appropriate reverse camera and need the coding for it.
Finding other info on MK7, but doesn't apply to our menu in the MK5
Any help, please?!?!
Again, Reverse Camera coding needed!
|
|
|
Post by adiwob on Dec 3, 2018 7:23:48 GMT
Hello, You have to go to your radio module then Long Coding, go to Byte 3 and check bit 6. If this doesn't work try to contact the seller to give you instructions.
|
|