Passat GTE -17 -- Traffic Sign Recognition not working FIXED

Hi all ninjas!

I just bought my self an OBD11, so I am quite new to this, so please insult and offend me freely.

Ive got Lane Assist (the camera) from factory but the "smaller non-nav Infotainment" in my Passat GTE 2017. So I should be all set to activate the Traffic sign feature!
I tried the "app" for activation of the Traffic sign feature, it comes back with "not supported"
So I jumped into the "pro settings" and tried it the manual way:

Traffic Sign Assist Activation

Select Control unit 5F (Information Electrical)<Found it, check!>
Adaptation
Select channel (63) vehicle function list BAP traffic_sign_recognition_0x21 <Found it, check!>
Değer=Active
Select channel (151) vehicle menu operation-menu_display_road_sign_identification <Found it, check!>
Değer=Active
Select channel (153) vehicle menu operation-menu_display_road_sign_identification_over_threshold_high <Found it, check!>
Değer=Active
Control unit A5 (front / advance camera) (Well, its not called front / advance camera) <Found it, check!>
Security access  <Found it, check!>
Access Code 20103 <Found it, check!>
Control unit Long Coding  <Found it, check!>
Byte 1 <Found it, check!>
Bit 0 Activate - "01 Traffic Sign Recognition (FTE) active" <Noo, it does not say, doesnt look right....>

Select Control unit 17 (Dashboard)
Control unit Long Coding
Byte 5
Bit 2 Aktivate
Control unit A5 (front / advance camera)
Adaptation
Select : channel numbers indicate end of speed limit
Importance to actively invest Show Valid suffix
View Channel Valid suffix
Corresponding value adjust default: 00100111

So my question is, would Byte 1 bit 0 under Control Unit A5 be the bit to change for my Passat GTE?

Thank you in advance!
// Tubstr -- Sweden