|
Post by kopter28 on Nov 8, 2018 3:35:22 GMT
Yesterday I noticed a strange issue where my Blindspot Monitor wasn’t working and when I tried to turn it on or off I would get a message that said: This function is currently not available. Strangely while this was happening I also noticed a new menu for Lane Change System (Side Assist) which I don’t think I saw before in my car, a Canadian market 2018 Golf ML7.5 R. What is this option? When I looked at the 3C side assist module it’s almost like it was erased. I had a backup of the long coding, so I coded it back. Now my blindspot monitor works again, I again have the option for cross traffic alert in the dash, but the Lane Change System (Side Assist) has disappeared. Anyone can shed some light on what is happening?
|
|
|
Post by krystian660 on Nov 8, 2018 6:27:03 GMT
If you didn't damage radar by your coding it means that probably you need to replace radar unit because it is broken. I know same issue with Seat Ateca.
|
|
|
Post by kopter28 on Nov 8, 2018 12:34:15 GMT
If you didn't damage radar by your coding it means that probably you need to replace radar unit because it is broken. I know same issue with Seat Ateca. As mentioned above, I restored the coding and it seems to work again, but I’m still curious about the other option that was showing.
|
|
|
Post by kopter28 on Nov 8, 2018 13:58:24 GMT
If you didn't damage radar by your coding it means that probably you need to replace radar unit because it is broken. I know same issue with Seat Ateca. As mentioned above, I restored the coding and it seems to work again, but I’m still curious about the other option that was showing. I spoke too soon. Options for Blindspot Monitor and Cross-traffic Alert are back, but when I try to turn them on I get an error.
|
|
|
Post by krystian660 on Nov 9, 2018 8:02:54 GMT
Post you coding history.
|
|
|
Post by kopter28 on Nov 27, 2018 4:59:32 GMT
Took it to the dealer a few days ago. They updated the firmware on the module as part of TSB 2052500, and now everything is back to normal again.
|
|
|
Post by fuorilegge79 on Dec 3, 2018 9:02:05 GMT
Took it to the dealer a few days ago. They updated the firmware on the module as part of TSB 2052500, and now everything is back to normal again. Hi... I wish to add that menú voice too (Side Assist). A friend activated it, then removed it. Can you please post a full scan of Your 3C, 5F or what needed for it please? Thanks a lot. Best regards.
|
|