Post by markusm on Nov 7, 2018 13:05:45 GMT
I need to perform a throttle body alignment on my Lupo.
My motorcode is AKQ and the engine is a "Cable-Throttle Engine"
I found this post to start with.
(These are engines with a physical cable between the accelerator and the throttle, but WITHOUT an ISV.)
Turn the key on but do not start the car.
Select
01 - Engine
Basic settings
Enter Group 098 (Note: Some SIMOS or Marelli ECU's use Group 001 such as ADY & AEE engines)
Drive-by-Wire (DBW) Engines
(These are engines WITHOUT a physical cable between the accelerator and the throttle.
Turn the key on but do not start the car.
Select
01 - Engine
Basic settings
Enter Group 060
And this video:
From the post above i need to enter group 098. Further the video shows a button to perform the throttle body alignment.
Unfortunately i do not see this button?!
Please help.