|
|
Post by mark1971 on Oct 21, 2018 3:19:30 GMT
Instaled in my mk6 gti 2012 in plug 16 conector on pin 10 and cant find how to activete with obdeleven help
|
|
hites
New Member
Posts: 5
|
Post by hites on Jan 5, 2020 7:57:57 GMT
Realizing this is dated but curious if you were successful. I can get to this in the app with the one-click functions but continually receive the same error “check ignition and try again.” Idk what it means and I can’t get around it.
|
|
tobbe
New Member
Posts: 1
|
Post by tobbe on Jan 19, 2020 19:30:49 GMT
I have a similar problem, installed the puddle lights and was going to activate them via OBDII, but when I enter the "puddle light" it says "not supported" 🤔 so is there anyone who can help me with this?
|
|
|
|
Post by patrick3569 on Apr 29, 2020 5:28:03 GMT
8) VAG COM to TURN ON THE PUDDLE LIGHT POWER TO THE WIRES -
Coding is as follows:
A) Open Vag Com and Select "Door Elect, Driver"
B) Select "Coding"
C) Copy and paste your coding values in a word document incase of error.
D) Add 2 to your code and enter the new value. (i.e.-if value is 1020 + 2 : 1022 is the new
value)
E) Click "Do It" to save and close the controller.
F) You will need to follow the same Vag Com steps for the Passenger side. Otherwise only one
side will light. Use "Door Elect, Pass." for the passenger puddle lamp.
|
|
