Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 20, 2018 19:07:04 GMT
Currently, it's 3. Would like to make it 5 like in my Golf. Anyone know where to do this? Looked in 09-Central Electronics, but didn't find it.
|
|
|
|
Post by krystian660 on Oct 20, 2018 22:26:51 GMT
Probably it isn't possible. Usually not working when coded.
|
|
|
|
Post by cabby09 on Oct 24, 2018 14:50:42 GMT
Currently, it's 3. Would like to make it 5 like in my Golf. Anyone know where to do this? Looked in 09-Central Electronics, but didn't find it. Login to 09 security access first Central Electronics 09 Aussenlicht_blinker Komfortblinken Blinkzyklen Change old value from 3 to 5 Accept it Test it, should be working 100% |
|
pdmjo
New Member
Posts: 8
|
Post by pdmjo on Nov 14, 2018 5:50:15 GMT
Just tried it out, however, mine only accepts values from 0-3? Changing to 5, whilst it said the change was accepted, didn't work. Any ideas what I may be missing?
|
|
|
|
Post by cabby09 on Nov 15, 2018 14:12:14 GMT
Just tried it out, however, mine only accepts values from 0-3? Changing to 5, whilst it said the change was accepted, didn't work. Any ideas what I may be missing? Just do a favtory reset on your radio system on the lights section. I think that's what I remember doing. My one was the same as yours... Only showed 0-3 initially. It should work after the reset |
|
pdmjo
New Member
Posts: 8
|
Post by pdmjo on Nov 15, 2018 23:09:05 GMT
Just tried it out, however, mine only accepts values from 0-3? Changing to 5, whilst it said the change was accepted, didn't work. Any ideas what I may be missing? Just do a favtory reset on your radio system on the lights section. I think that's what I remember doing. My one was the same as yours... Only showed 0-3 initially. It should work after the reset Sorry if this is a silly question, but do you mean a manual reset by holding the power button? Or a reset via obdeleven (in which case, how would I do that?) |
|
|
|
Post by cabby09 on Nov 16, 2018 8:20:05 GMT
Just do a favtory reset on your radio system on the lights section. I think that's what I remember doing. My one was the same as yours... Only showed 0-3 initially. It should work after the reset Sorry if this is a silly question, but do you mean a manual reset by holding the power button? Or a reset via obdeleven (in which case, how would I do that?) In the radio settings you can go to the section to factory reset. Just reset the lights section. |
|
pdmjo
New Member
Posts: 8
|
Post by pdmjo on Nov 21, 2018 6:01:29 GMT
Sorry if this is a silly question, but do you mean a manual reset by holding the power button? Or a reset via obdeleven (in which case, how would I do that?) In the radio settings you can go to the section to factory reset. Just reset the lights section. Thanks Cabby. |
|
|
|
Post by coco1124 on Feb 22, 2019 10:52:03 GMT
Hi, when I do the same for my 2018 Tiguan 2.0TSI till last stage and Press 3 to change after that, the device fail, need to reconnect again.
|
|
|
|
Post by merts75 on Feb 16, 2020 18:34:42 GMT
Doesn’t work, the value option is 0-3, if I put 5 it still blinks 3 times
How is this so? 2019 Tig
|
|
