Post by potrek on Sept 8, 2018 6:07:28 GMT
Hello my Friend. My octavia my2018 doesnt have light and rain sensor, only humanidy,
So i put good sensor, switch with auto, one cable from switch to mainbord.
i try activate with obd11 like this „
Go to central electrics module, then select adaptation, then search for "Assistance light functions", then select Assistance light functions-Regen_Lichtsensor, then set the value to LIN_REGEN_LICHT_SENSOR (assuming that the RLHS that you installed was a LIN device). At some point in this process, OBD11 will ask you to enter the magic number 31347 .
And i have a problem, evrything works good rain sensor and light, but when switch is in position „ auto „ my octavia show error:” interference: car lighting”
i dont have any idea. Pls for a help
i check few minutes ago and the light sensor doesnt work, only rain sensor.
so i think that a wrony coding, maybe obd11 doesnt code for octavia FL
So i put good sensor, switch with auto, one cable from switch to mainbord.
i try activate with obd11 like this „
Go to central electrics module, then select adaptation, then search for "Assistance light functions", then select Assistance light functions-Regen_Lichtsensor, then set the value to LIN_REGEN_LICHT_SENSOR (assuming that the RLHS that you installed was a LIN device). At some point in this process, OBD11 will ask you to enter the magic number 31347 .
And i have a problem, evrything works good rain sensor and light, but when switch is in position „ auto „ my octavia show error:” interference: car lighting”
i dont have any idea. Pls for a help
i check few minutes ago and the light sensor doesnt work, only rain sensor.
so i think that a wrony coding, maybe obd11 doesnt code for octavia FL