|
Post by thattdiguy on Sept 6, 2018 1:47:26 GMT
Hey everyone, first time poster. Picked up a 15 Golf TDI S about two months ago. Recently bought and obdeleven unit and started coding some things.
Everything has worked 100% until I tried coding my led drl’s. They work fine without error until I turn on the high beams, then they show the error light on the dash, and under the messages screen to check left and right drl’s. These are just led bulbs as I have the base model Golf.
Here’s what I coded if anyone can help?
Leuchte4 and 5 are the same...
1) lasttyp5 - 1 LED Tagfahrlichtmodul Versorgung 2) lampendefekbitposition 5 - 4c 3) fehlerort mittleres byte dtc-dfcc 5 4) lichtfunktion a 5 - tagfahrlicht 5) lichtfunktion b 5 - nicht aktiv 6) dimmwert ab 5 - 100 7) lichtansteuerung hd ab 5 - always 8) lichtfunktion c 5 - blinken rechts aktiv (beide phasen) 9) lichtfunktion d 5 - niche aktiv 10) dimmwert cd 5 - 0 11) dimming direction cd 5- minimize 12) lichtfunktion e 5 - standlicht allgemein (schlusslicht, positionslicht, begrenzungslicht) 13) lichtfunktion f 5 - niche aktiv 14) dimmwert ef 5 - 31 15) dimming direction ef 5 - maximize 16) lichtfunktion g 5 - niche aktiv 17) lichtfunktion h 5 - niche aktiv 18) dimmwert gh 5 - 0 19) dimming direction gh 5 - maximize
|
|
|
Post by newty on Sept 6, 2018 15:44:22 GMT
EDIT: Did you exchange the H15 Halogen Bulbs or do you have the LED-Wing equipped by factory. Everything below is for the LED Wing
Well.. Leuchte4 and 5 are Power Supplies only. You shouldn't code them. Here is the factory setting:
Leuchte4TFL LB4: Lasttyp 4: 1 - LED Tagfahrlichtmodul Versorgung Lampendefektbitposition 4: 3a Fehlerort mittleres Byte DTC-DFCC 4: 49 Lichtfunktion A 4: Tagfahrlicht Lichtfunktion B 4: nicht aktiv Dimmwert AB 4: 127 Lichtansteuerung HD AB 4: always Lichtfunktion C 4: Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht) Lichtfunktion D 4: Parklicht links (beidseitiges Parklicht aktiviert li & re) Dimmwert CD 4: 127 Dimming Direction CD 4: maximize Lichtfunktion E 4: nicht aktiv Lichtfunktion F 4: nicht aktiv Dimmwert EF 4: 0 Dimming Direction EF 4: maximize Lichtfunktion G 4: nicht aktiv Lichtfunktion H 4: nicht aktiv Dimmwert GH 4: 0 Dimming Direction GH 4: maximize Leuchte5 TFL RB32: Lasttyp 5: 1 - LED Tagfahrlichtmodul Versorgung Lampendefektbitposition 5: 44 Fehlerort mittleres Byte DTC-DFCC 5: 4b Lichtfunktion A 5: Tagfahrlicht Lichtfunktion B 5: nicht aktiv Dimmwert AB 5: 127 Lichtansteuerung HD AB 5: always Lichtfunktion C 5: Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht) Lichtfunktion D 5: Parklicht rechts Dimmwert CD 5: 127 Dimming Direction CD 5: maximize Lichtfunktion E 5: nicht aktiv Lichtfunktion F 5: nicht aktiv Dimmwert EF 5: 0 Dimming Direction EF 5: maximize Lichtfunktion G 5: nicht aktiv Lichtfunktion H 5: nicht aktiv Dimmwert GH 5: 0 Dimming Direction GH 5: maximize
For coding DRL intensity use Leuchte 2 and 3
|
|
|
Post by thattdiguy on Sept 6, 2018 22:38:58 GMT
EDIT: Did you exchange the H15 Halogen Bulbs or do you have the LED-Wing equipped by factory. Everything below is for the LED Wing Well.. Leuchte4 and 5 are Power Supplies only. You shouldn't code them. Here is the factory setting: Leuchte4TFL LB4: Lasttyp 4: 1 - LED Tagfahrlichtmodul Versorgung Lampendefektbitposition 4: 3a Fehlerort mittleres Byte DTC-DFCC 4: 49 Lichtfunktion A 4: Tagfahrlicht Lichtfunktion B 4: nicht aktiv Dimmwert AB 4: 127 Lichtansteuerung HD AB 4: always Lichtfunktion C 4: Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht) Lichtfunktion D 4: Parklicht links (beidseitiges Parklicht aktiviert li & re) Dimmwert CD 4: 127 Dimming Direction CD 4: maximize Lichtfunktion E 4: nicht aktiv Lichtfunktion F 4: nicht aktiv Dimmwert EF 4: 0 Dimming Direction EF 4: maximize Lichtfunktion G 4: nicht aktiv Lichtfunktion H 4: nicht aktiv Dimmwert GH 4: 0 Dimming Direction GH 4: maximize Leuchte5 TFL RB32: Lasttyp 5: 1 - LED Tagfahrlichtmodul Versorgung Lampendefektbitposition 5: 44 Fehlerort mittleres Byte DTC-DFCC 5: 4b Lichtfunktion A 5: Tagfahrlicht Lichtfunktion B 5: nicht aktiv Dimmwert AB 5: 127 Lichtansteuerung HD AB 5: always Lichtfunktion C 5: Standlicht allgemein (Schlusslicht, Positionslicht, Begrenzungslicht) Lichtfunktion D 5: Parklicht rechts Dimmwert CD 5: 127 Dimming Direction CD 5: maximize Lichtfunktion E 5: nicht aktiv Lichtfunktion F 5: nicht aktiv Dimmwert EF 5: 0 Dimming Direction EF 5: maximize Lichtfunktion G 5: nicht aktiv Lichtfunktion H 5: nicht aktiv Dimmwert GH 5: 0 Dimming Direction GH 5: maximize
For coding DRL intensity use Leuchte 2 and 3 I am replacing my H15 halogens with the LED’s. Thank you for the info. Would you mind posting the correct coding for Leuche 2 and 3?
|
|
|
Post by newty on Sept 10, 2018 10:00:57 GMT
I just had the chance to look over the factory programming for Xenon with H15. You should change 4 and 5 not to Versorgung ("Supply") but to Allgemeine LED ("General LED") or similar - maybe you can just try them out? You will need to turn off and on the ignition for every setting, as the "cold" diagnosis is unable to apply the parameters on the fly. Changes in 2 and 3 only apply to "high" Xenon/LED combinations, so please just ignore my hint.
|
|