|
|
Post by vvariant on Aug 19, 2018 19:23:12 GMT
Hi,
I know, that is possible to enable the function on B7 without electric seats, How to enable the menu through obdeleven to select this option? Hardware is separate issue, but I would like to enable it via software is there are no drawbacks.
|
|
|
|
Post by kinger on Aug 19, 2018 22:58:58 GMT
Hi,
I would also like to know this as well, many thanks.
|
|
|
|
Post by Thirsty on Aug 20, 2018 9:30:20 GMT
Correct it is possible to activate but it won't work properly. Here's what i found:  Source |
|
|
|
Post by arzee08 on Aug 22, 2018 8:49:42 GMT
Looked into this as well but my module doesn't have a byte 4. Only 00,01,02
|
|
|
|
Post by koushtj on Oct 7, 2018 23:49:18 GMT
Looked into this as well but my module doesn't have a byte 4. Only 00,01,02 I also have the same options. I have a 2012 v6 SE. There is no byte 4. Has anyone gotten this to work? |
|
|
|
Post by vvariant on Jan 6, 2019 9:45:33 GMT
Looks like the same, only three digits, no possibility to add any.
|
|
|
|
Post by ivan411 on Jan 20, 2019 2:36:14 GMT
You must go do Driver and Passenger door, Long coding and byte 1, bit 0 check in both modules...seat memory and/or mirror with memory function.... After that you go comfort module byte 14 bit 7 and check mirror lowering with reverse gear (only with memory seats).Option will show up in MFA menu and check that, put the button position in R and try.....If the function after that doesn't work and error of position sensore shows that mean you can't have mirror lowering.
|
|
